00198076-01_JC_PM_WF1_TX_EN.pdf - 第26页
www.asm-smt.com
6 WF 1 TX-Series Maintenance Clean feeder modules and cut the tapes 3 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T1, T18
Wear Part: Consumables:
www.asm-smt.com
1 Vacuum all loose components from feeder
modules.
2 Cut the remaining tape directly at the
feeder.
3 After cutting: Ensure to leave 2 holes over-
lapping.
4 Repeat steps 1-3 for other feeder tables.
www.asm-smt.com
7 WF 1 TX-Series Maintenance Return the tables (COT) 3 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
www.asm-smt.com
1 Return all COT. 2 Close the covers. 3 Press insert COT button to dock table.
4 Do not click the start button.