00198076-01_JC_PM_WF1_TX_EN.pdf - 第24页
www.asm-smt.com
5 WF 1 TX-Series Maintenance Clean conveyors, lifting tables, gantry cables 4 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T1
Wear Part: Consumables:
C3
www.asm-smt.com
1 Clean gantry cables for Y-Axis. 2 Clean gantry cables X-Axis. 3 Move the gantries to the limit location 1
and repeat steps 1 to 2 for other gantry.
4 Vacuum all loose components on and
around the whole PCB conveyor.
www.asm-smt.com
6 WF 1 TX-Series Maintenance Clean feeder modules and cut the tapes 3 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T1, T18
Wear Part: Consumables:
www.asm-smt.com
1 Vacuum all loose components from feeder
modules.
2 Cut the remaining tape directly at the
feeder.
3 After cutting: Ensure to leave 2 holes over-
lapping.
4 Repeat steps 1-3 for other feeder tables.