00196353-04_JG_X-FeederTestStation_EN.pdf - 第20页
1 - Checking of the Feeder Modul e 20
1 - Checking of the Feeder Module
19
1 - Checking of the Feeder Module
1 - Checking of the Feeder Module
20
1 - Checking of the Feeder Module 1-1 Dealing with Stored Errors in the Feeder Module
21
– 1-1 Dealing with Stored Errors in the Feeder Module
► At first clean the pickup position and the foil insert.
Remove all clamped components and remaining foil.
► If so, reset the error as shown in the following images.
If it is possible to reset the error, continue with work step (1).
If it is NOT possible to reset the error, the feeder module must be repaired. A detailed description for repairs is given in the
X-Feeder Care service manual.
NOTICE
May be, an error is still stored in the feeder module. In this case the display of the
X-Feeder Testbox
shows
an error number with the appropriate error.