00196353-04_JG_X-FeederTestStation_EN.pdf - 第3页
Job Guide X-Feeder Test Station3 Contents 3 T a b le o f C o n t e n t s 1 Introduction 5 1.1 Scope of Delivery 5 1.2 Use of Symbols 6 1.3 Safety Instructions 7 1.4 Correct and Incorrect Us e of the Testing Device 8 1.5 …
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
We have reviewed t he contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be
precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary
connections are included in subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 München
Germany
Item no.: 00196353-04
www.siplace.com Printed by ASM Assembly Systems
Job Guide X-Feeder Test Station3
Contents
3
Table of Contents
1 Introduction 5
1.1 Scope of Delivery 5
1.2 Use of Symbols 6
1.3 Safety Instructions 7
1.4 Correct and Incorrect Use of the Testing Device 8
1.5 Mounting the Plate to the Single Slot EDIF 9
2 Connecting the X-Feeder Testbox 11
3 A - Slipping on the Feeder Module and preparing 15
4 1 - Checking of the Feeder Module 19
4.1 1-1 Dealing with Stored Errors in the Feeder Module 21
4.2 1-2a Performing the X-Feeder-Test (4-88 mm X, SmartFeeder 4, 8 mm X) 28
4.3 1-2b Performing the X-Feeder-Test (2x8 mm X, SmartFeeder 12, 16 mm X) 29
4.4 1-3 Analyzing the X-Feeder Test 33
5 2a - Carrying out the reference run (only 4-88 mm X, SmartFeeder 4, 8
mm X)
35
Job Guide X-Feeder Test Station4
Contents
4
6 2b - Resetting the maintenance counter (only 2x8 mm X, SmartFeeder
12, 16 mm X)
37
7 3 - Updating the firmware 39
7.1 3-1 X-Feeder Testbox checks the Connections 41
7.2 3-2 X-Feeder Testbox checks the Firmware Version 42
7.3 3-3 Starting the Firmware Update 43
7.4 3-4 Connecting and disconnecting the Feeder Module 44
7.5 3-5 X-Feeder Testbox checks the Firmware Update 45
8 4 - Saving the Log File 47
8.1 4-1 Starting the Storage 48
8.2 4-2 X-Feeder Testbox checks the Storage 49
9 B - Removing the Feeder Module 51
10 Switching off X-Feeder Testbox 53
11 Removing the X-Feeder Testbox Cable 55