00196353-04_JG_X-FeederTestStation_EN.pdf - 第22页
1 - Checking of the Feeder Modul e 1-1 Dealing wi th Stored Error s in the Feeder Module 22 Handle Performing a reference run
1 - Checking of the Feeder Module 1-1 Dealing with Stored Errors in the Feeder Module
21
– 1-1 Dealing with Stored Errors in the Feeder Module
► At first clean the pickup position and the foil insert.
Remove all clamped components and remaining foil.
► If so, reset the error as shown in the following images.
If it is possible to reset the error, continue with work step (1).
If it is NOT possible to reset the error, the feeder module must be repaired. A detailed description for repairs is given in the
X-Feeder Care service manual.
NOTICE
May be, an error is still stored in the feeder module. In this case the display of the
X-Feeder Testbox
shows
an error number with the appropriate error.
1 - Checking of the Feeder Module 1-1 Dealing with Stored Errors in the Feeder Module
22
Handle
Performing a reference run
1 - Checking of the Feeder Module 1-1 Dealing with Stored Errors in the Feeder Module
23
Transportation error
Foil torn