DECAN_S1_Maintenance(Eng_Ver1.1)_Print.pdf - 第73页

Mon thly Inspe ction chapt er 5 Nex t Generation, Multi- Functi onal Placer DE CAN S1 M ain ten anc e Ha nd boo k 5-1 8 Cleaning and Lubricating Y Frame LM Guide Monthly Inspe ction T ool for M aintenanc e Ultra-fine fib…

100%1 / 84
Monthly Inspection
chapter 5
Next Generation, Multi-Functional Placer
DECAN S1 Maintenance Handbook
5-17
Cleaning and Lubricating X Frame LM Guide, Ball Screw
Step 13.
Inject the grease using a lubricator.
(A1 ~ A4: LM Guide, B1: Ball screw)
Caution
If the machine's operating environment is harsh, check its lubrication
status frequently.
Caution
The designated grease must be applied using the designated
lubricator in the designated manner. Other lubricating methods are
unacceptable.
Step 14.
Move the head assembly to the left and right three
times using a head assembly handle.
Step 15.
Release the emergency stop as described in "Releasing
'Emergency Stop' mode" on page 1-6 and perform the
operation again.
Monthly Inspection
chapter 5
Next Generation, Multi-Functional Placer
DECAN S1 Maintenance Handbook
5-18
Cleaning and Lubricating Y Frame LM Guide
Monthly Inspection
Tool for Maintenance
Ultra-fine fiber cloth, Flat Brush, Lubricator, GREASE-GREASE_AFE-CA
Measures
Step 1.
Move the X Frame to rear by referring to "Backward
movement of the X-frame" on page 1-4
Step 2.
Press the 'STOP' and 'RESET' buttons in order after
pressing the 'EMG' button on the OP panel to stop
operation.
For more details, refer to "How to perform emergency stop" on page
1-2.
Step 3.
Clean the LM guide rail using an ultra fine fiber cloth.
Step 4.
Inject the grease using a lubricator.
A
B
Cleaning and Lubricating Y Frame LM Guide
(Time required: 60min / No. M-10)
Monthly Inspection
chapter 5
Next Generation, Multi-Functional Placer
DECAN S1 Maintenance Handbook
5-19
Cleaning and Lubricating Y Frame LM Guide
Step 5.
Move the front and rear X frames back and forth three
times.
Caution
The designated grease must be applied using the designated
lubricator in the designated manner. Other lubricating methods are
unacceptable.
Caution
If the machine's operating environment is harsh, check its lubrication
status frequently.
Step 6.
Release the emergency stop as described in "Releasing
'Emergency Stop' mode" on page 1-6 and perform the
operation again.