Productivity Lift.pdf - 第53页
User Manual - Productivity Lift Soko 00166631-01 / 12031477 4 Description of the Product Software version V 43.140 Edition April 2006 4.1 Designated use of the device 45 4 Description of the Product 4.1 Designated use of…
3 Assembling and installing User Manual - Productivity Lift
3.3 Installation / Reinstallation of emergency conveyor Edition 02/2004
44
User Manual - Productivity Lift Soko 00166631-01 / 12031477 4 Description of the Product
Software version V 43.140 Edition April 2006 4.1 Designated use of the device
45
4 Description of the Product
4.1 Designated use of the device
This version of the Productivity Lift (SPL) is designed for parallel supply of 3 pick and place ma-
chines in a production line. The SPL is equipped with a dual lane lift conveyor. Bare boards are
handed over to the next available pick and place machine. If a pick and place machine is currently
occupied, the boards are transferred to the next available pick and place machine on an underfloor
conveyor.
The SPL will always try to takeover and transport 2 of the same type of board, i.e. 2 bare boards
or 2 mounted boards. If this is not possible, the lift will only takeover and transfer on one lane.
4.2 The function keys
Fig. 4 - 1 Control desk - Key arrangement
The keys of the CAN/P50 control desk are arranged as follows:
"Hand" : Calls up the test operation functions.
"V" and "ALT" : Call up the configuration menu.
"ALT" : Calls up the parameter menu.
"Start / Stop" : Starts the automatic operating mode and switches to the stand-by mode.
"W" : Cursor key to scroll downwards in the selection menus.
"V" : Cursor key to scroll upwards in the selection menus.
"Enter" : This is used to confirm modified settings and proceed to the next input menu
within the menus. Acknowledgement of alarm signals.
ALT
Enter
Start
Stop
Prod. Lift
V 43.140
4 Description of the Product User Manual - Productivity Lift Soko 00166631-01 / 12031477
4.2 The function keys Software version V 43.140 Edition April 2006
46