Productivity Lift.pdf - 第88页

6 Set-up mode User Manual - Productivity Lift Soko 00166631-01 / 12031477 6.1 1 Address width 1 / Address width 2 Software version V 43.140 Edition April 2006 80

User Manual - Productivity Lift Soko 00166631-01 / 12031477 6 Set-up mode

Software version V 43.140 Edition April 2006 6.11 Address width 1 / Address width 2

These setting are either already set or have been adjusted by the service personnel during instal-

lation of the machines.

NOTE:

Any changes to these settings may only be made with prior consent from service technicians from

SIEMENS AG L&A!

6.11.1 Address width 1

Fig. 6 - 19 Address width 1

6.11.2 Address width 2

Fig. 6 - 20 Address width 2

ALT

Enter

Start

Stop

Address width 1

0000

ALT

Enter

Start

Stop

Address width 2

0000

6 Set-up mode User Manual - Productivity Lift Soko 00166631-01 / 12031477

6.11 Address width 1 / Address width 2 Software version V 43.140 Edition April 2006

User Manual - Productivity Lift Soko 00166631-01 / 12031477 7 Manual mode

Software version V 43.140 Edition April 2006 7.1 Manual mode 1 - Lift

7 Manual mode

In the manual mode, the individual functions can be tested with the aid of the cursor keys.

The "Hand" key is used for change over in the manual mode.

7.1 Manual mode 1 - Lift

Test function for the shuttle.

The cursor keys "V" and "W" can be used to move the shuttle upwards and downwards, while the

"ALT" key can be used to switch the belt drive on for as long as the key is pressed down. The

shuttle can only be moved upwards if top conveyor is in its upper position.

The "Enter" key can be used to proceed to the next test function. To cancel the procedure, exit the

menu using the "Start/Stop" key.

Fig. 7 - 1 Manual mode 1 - Lift

ALT

Enter

Start

Stop

Manual mode 1

Lift