Productivity Lift.pdf - 第54页
4 Description of the Product User Manual - Productivity Lift Soko 00166631-01 / 12031477 4.2 The function keys Software version V 43.140 Edition April 2006 46
User Manual - Productivity Lift Soko 00166631-01 / 12031477 4 Description of the Product
Software version V 43.140 Edition April 2006 4.1 Designated use of the device
45
4 Description of the Product
4.1 Designated use of the device
This version of the Productivity Lift (SPL) is designed for parallel supply of 3 pick and place ma-
chines in a production line. The SPL is equipped with a dual lane lift conveyor. Bare boards are
handed over to the next available pick and place machine. If a pick and place machine is currently
occupied, the boards are transferred to the next available pick and place machine on an underfloor
conveyor.
The SPL will always try to takeover and transport 2 of the same type of board, i.e. 2 bare boards
or 2 mounted boards. If this is not possible, the lift will only takeover and transfer on one lane.
4.2 The function keys
Fig. 4 - 1 Control desk - Key arrangement
The keys of the CAN/P50 control desk are arranged as follows:
"Hand" : Calls up the test operation functions.
"V" and "ALT" : Call up the configuration menu.
"ALT" : Calls up the parameter menu.
"Start / Stop" : Starts the automatic operating mode and switches to the stand-by mode.
"W" : Cursor key to scroll downwards in the selection menus.
"V" : Cursor key to scroll upwards in the selection menus.
"Enter" : This is used to confirm modified settings and proceed to the next input menu
within the menus. Acknowledgement of alarm signals.
ALT
Enter
Start
Stop
Prod. Lift
V 43.140
4 Description of the Product User Manual - Productivity Lift Soko 00166631-01 / 12031477
4.2 The function keys Software version V 43.140 Edition April 2006
46
User Manual - Productivity Lift Soko 00166631-01 / 12031477 5 Configuration
Software version V 43.140 Edition April 2006 5.1 Language
47
5 Configuration
The configuration serves to set the required operating parameters. These are basic settings,
which need generally only be set during the initial system installation. These settings can be mod-
ified at a later date, but only by personnel with the relevant expertise.
Numerical values can be entered as follows using the cursor keys and the ALT key:
1. The ALT key can be used to move the flashing cursor to the position to be changed. The cursor
moves from left to right from position to position.
2. The cursor keys „V” and „W” can be used to increase or decrease the numerical value at the
relevant position.
If selection options are given in the menus, the cursor keys can be used to scroll through them in
both directions.
Data is only entered in the menus if the „Enter” key is pressed after modifying the settings. The
user is then taken automatically to the next menu. It is possible to return to the stand-by mode via
the last menu.
If entries are not confirmed, the „Start/Stop” key must be pressed instead of the „Enter” key.
In stand-by mode, the configuration menu is called up using the „V” and „ALT” keys. These keys
must be actuated immediately one after the other.
5.1 Language
This menu is used to set the language of the display. The options are German and English.
Fig. 5 - 1 Language
ALT
Enter
Start
Stop
Language
English