Vision_Series_EN.pdf - 第18页
18 1. 2. 3. 4. 5. 6. ViCON VisionX 1. Alarms The top area of the screen giv es you a clear overview where you can view , interpret and edit alarm messages. 4. Machine view The machine view offers an overview of the modul…
17
In the SSP (Speed Switch Process) the process atmosphere
cooling process takes place without impacting the nitrogen
level. Extra pipes are installed in the pre-heating and peak
zones to serve as an outlet through which the cooler ambi-
ent air can be drawn by the internal exhaust system and a
fan upon activation of the SSP, serving to achieve the zones'
target temperature. Quick exhaust is activated when there
is a change of program to a lower temperature prole and
is deactivated once the temperature tolerances have been
reached.
SSP
SSP+
The SSP+ functions according to the same principle as
the SSP in the case of a process change, but an additional
setting possibility distinguishes it from SSP. When it comes
to proles with high temperature differences between the
individual heating zones SSP+ can be used to achieve an op-
timum division of zones. Because temperature can overspill
from a zone with a high temperature into neighbor zones, it
may be necessary to actively cool this on a permanent basis
in order to ensure the relevant temperature prole. Here
the internal exhaust system draws the colder ambient air
through correspondingly installed pipes and, in doing so, en-
sures precision temperature stability in the respective zone.
The spill-over heat from neighbor zones is thus drastically
reduced and optimum zone division guaranteed.
VXP+
Vac
VXP+
Quick Exhaust
Quick exhaust serves to extract process atmosphere rapidly
as a means of achieving the desired temperature change.
Here the process gas in the cooling line is extracted via the in-
ternal exhaust system. Quick exhaust is automatically activat-
ed if there is a change of program to a colder prole. As soon
as the temperature is within the tolerance range specied by
the program, quick exhaust is automatically deactivated.
VXP+
Vac
VXP+ VXS
VXS
Optimised process changeover
Rapid switch to lower temperature proles
Process changes often need to take place during a production shift, where the reow soldering
system requires longer periods to cool from a higher to a lower temperature prole. This is the case
for example when changing from lead-free to leaded solders. For considerably quicker cooling Rehm
offers various options which enable drastic reductions in waiting times.
VisionX-Series | Process changeover
18
1.
2.
3.
4.
5.
6.
ViCON
VisionX
1. Alarms
The top area of the screen gives you a clear
overview where you can view, interpret and
edit alarm messages.
4. Machine view
The machine view offers an overview of the
modular construction of your system, the
current loading situation and the status of the
process zones.
2. Favourites bar
In the favourites bar you can view selected
values. This then appears on the main screen
and on every page in the dened position.
5. Options
Machine options can be set depending on
the system equipment. For this there are
up to ten different options available for your
manufacturing process.
3. Status bar
Colour-contrasting markings in the status
bar provide you with information on the
operating mode of the system.
6. Display area
The display area shows you all prole
parameter actual values, e.g. temperature,
lter or system power consumption.
19
Clear product management with offline programming
Intuitive software operation with touch-screen surface
Clear product management with oine programming
Parameter transparency through module groupings
Easy adaption due to favourites bar
Multilingual software
Innovative software
User-friendly and easy operation
With the ViCON Rehm offers straightforward software for
the VisionX-Series, boasting intuitive operation with its
touch-screen surface.
All messages, commands and parameters can be viewed
at one glance on the main screen using machine view. With
a number of features including a freely congurable favour-
ites bar, the structured grouping of parameters or individual
process tracking and documentation ViCON provides you with
optimum assistance in your production processes.
While developing the software Rehm experts have rened many
aspects including product management. The creation of new
products or the copying of certain properties in parallel with
production on the machine is enabled. The parameters for new
creations are directly selectable, meaning that the production
sequence can progress faster and without any disruption.
As well as that, you can immediately recognise which action
mode the system is in from the operating status. Errors are
easier to differentiate and alarm messages can be evaluated
quickly and reliably.
Another plus of the ViCON is dening user administration.
Through the assignment of specic user roles each user has
exactly those rights activated that he or she needs for opera-
tion and work on the system – without any rigid hierarchy.
VisionX-Series | Software