e63ff15b284d51091b0099c347b42b49812b8d5ec82efc917b5b8e5cb0338ab8_optim.pdf - 第3页
3 He ight A dju sti ng Sy ste m Guide Knobs Sliding Guides Allen K ey Clamp Knobs Rubber Caps Features and Connections Adj usta ble S lot C lam ps for P CB f ixat ion. Ma x. PCB dimension (between clamps ) : 51x61 cm / 2…
2
Allen Key .................................................... 1 unit
Ref. 0013754
Manual ........................................................ 1 unit
Ref. 0026996
PHXLS Support ........................................................................................................................................ 1 unit
Packing List
The following items are included:
This manual corresponds to the following reference:
PHXL-SA
3
Height Adjusting
System
Guide
Knobs
Sliding
Guides
Allen Key
Clamp Knobs
Rubber
Caps
Features and Connections
Adjustable Slot Clamps
for PCB fixation.
Max. PCB dimension (between clamps):
51x61 cm / 20x24 in,
thickness 6 mm / 0.236 in.
4
Height Adjustment
It is also possible to use JBC´s metallic supports to stabilize the PCB to avoid PCB deformation.
Depending on the working height, Ref. PH201*, PH202* or PH203* can be used. Arrange them
between the PCB and the Preheater as shown below.
Low level
High level
Medium level
28 mm
38 mm
48 mm
PHXLS Support allows changing the height between the PCB and the preheater heating area. It can
be chosen between 3 positions for working height adjustment. To change the height, do as follows:
To raise the support, hold the base and pull up. To lower the support, press the button and
move down.
Ref. PH201*
Ref. PH202*
Ref. PH203*
* not included, sold separately