e63ff15b284d51091b0099c347b42b49812b8d5ec82efc917b5b8e5cb0338ab8_optim.pdf - 第5页

5 Adjustable slot clamps for P CB f ixat ion. Loo sen o ne s lidi ng gu id e, pull b ack a nd li f t ou t the PC B. Fast PCB Replacement PHX LS Su ppo r t lets you replace PCBs of the same batch fast and easily . Use the…

Height Adjustment

It is also possible to use JBC´s metallic supports to stabilize the PCB to avoid PCB deformation.

Depending on the working height, Ref. PH201*, PH202* or PH203* can be used. Arrange them

between the PCB and the Preheater as shown below.

Low level

High level

Medium level

28 mm

38 mm

48 mm

PHXLS Support allows changing the height between the PCB and the preheater heating area. It can

be chosen between 3 positions for working height adjustment. To change the height, do as follows:

To raise the support, hold the base and pull up. To lower the support, press the button and

move down.

Ref. PH201*

Ref. PH202*

Ref. PH203*

* not included, sold separately

Adjustable slot clamps

for PCB fixation.

Loosen one sliding guide, pull back and lift out the PCB.

Fast PCB Replacement

PHXLS Support lets you replace PCBs of the same batch fast and easily.

Use the sliding guides to change the PCBs.

Removing the PCB

Placing another PCB

Sliding Guide Knobs

Sliding Guide

Position it and tighten the sliding guide knobs.

Maintenance

Before carrying out maintenance or storage, always allow the support to cool down.

- Check periodically that the Support is clean, especially the lateral guides.

- Use a damp cloth when cleaning. Alcohol can only be used to clean the metal parts

- Replace any defective or damaged piece. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

Lateral Guides