e63ff15b284d51091b0099c347b42b49812b8d5ec82efc917b5b8e5cb0338ab8_optim.pdf - 第4页
4 Height Adjustment It is a lso p oss ibl e to use J BC´s metal lic s upp or ts to st abi lize th e PCB to avoi d PCB d efor mati on. De pe ndi ng on th e wor kin g he igh t, Ref. PH20 1 * , PH202* or PH 203* ca n be u s…
3
Height Adjusting
System
Guide
Knobs
Sliding
Guides
Allen Key
Clamp Knobs
Rubber
Caps
Features and Connections
Adjustable Slot Clamps
for PCB fixation.
Max. PCB dimension (between clamps):
51x61 cm / 20x24 in,
thickness 6 mm / 0.236 in.
4
Height Adjustment
It is also possible to use JBC´s metallic supports to stabilize the PCB to avoid PCB deformation.
Depending on the working height, Ref. PH201*, PH202* or PH203* can be used. Arrange them
between the PCB and the Preheater as shown below.
Low level
High level
Medium level
28 mm
38 mm
48 mm
PHXLS Support allows changing the height between the PCB and the preheater heating area. It can
be chosen between 3 positions for working height adjustment. To change the height, do as follows:
To raise the support, hold the base and pull up. To lower the support, press the button and
move down.
Ref. PH201*
Ref. PH202*
Ref. PH203*
* not included, sold separately
5
Adjustable slot clamps
for PCB fixation.
Loosen one sliding guide, pull back and lift out the PCB.
Fast PCB Replacement
PHXLS Support lets you replace PCBs of the same batch fast and easily.
Use the sliding guides to change the PCBs.
Removing the PCB
Placing another PCB
Sliding Guide Knobs
Sliding Guide
Position it and tighten the sliding guide knobs.