e63ff15b284d51091b0099c347b42b49812b8d5ec82efc917b5b8e5cb0338ab8_optim.pdf - 第8页
Th is pr odu ct s hou ld n ot be th row n in th e gar ba ge. In ac co rda nc e wit h the Eu rop ea n di rec tiv e 201 2/19/EU, ele ctr oni c eq uip me nt at th e en d of it s life m us t be c oll ec ted a nd re tur ne d …
Maintenance
Before carrying out maintenance or storage, always allow the support to cool down.
- Check periodically that the Support is clean, especially the lateral guides.
- Use a damp cloth when cleaning. Alcohol can only be used to clean the metal parts
- Replace any defective or damaged piece. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
6
Lateral Guides
Safety
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
- The temperature of accessible surfaces may remain high after the unit is turned off. Handle with care.
- Be careful with the remains of liquid tin. In contact with the skin, it can cause burns.
- Avoid flux coming into contact with skin or eyes to prevent irritation.
- Be careful with the smoke produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- This appliance can be used by children over the age of eight as well as persons with reduced
physical, sensory or mental capabilities or lacking experience provided that they have been given
adequate supervision or instruction concerning the use of the appliance and understand the hazards
involved. Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
7
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
0026996-141122
Specifications
PHXLS
Support for PCBs up to 51x61 cm / 20x24”
Ref.: PHXL-SA
- Dimensions (Low Position): 75.3 x 73.7 x 7.8 cm
(L x W x H) 29.65 x 29.02 x 3.07 in
- Dimensions (High Position): 75.3 x 73.7 x 9.8 cm
(L x W x H) 29.65 x 29.02 x 3.86 in
- Max. PCB Dimensions (Between Clamps): 51 x 61 mm / 20 x 24 in
Thickness 6 mm / 0.236 in
- Total Net Weight: 4.42 kg / 9.74 lb
- Total Package Dimensions / Weight: 82 x 80 x 23 cm / 23 kg
(L x W x H) 32.28 x 31.50 x 9.06 in / 50.71 lb
Complies with CE standards.
ESD safe.