00197795-04_JC_PM_WF1_SX12_EN.pdf - 第13页
www.asm-smt.com Equipment required for Maintenance Workflow 1 SIPLACE SX1/2 Tools Included in head exchange kits T01 - Vacuum cleaner T04 03034148-xx Calibration jig, version SST23 T02 - Waste bin for nozzles T05 0301056…
www.asm-smt.com
u Attaching warning signs:
If a machine can be locked, it must be.
However, there are situations where energy isolating devices cannot accom-
modate locks. In these cases, the energy isolating devices must be tagged to
warn employees that the machine is de-energized for servicing. The tag or
label must be securely fastened, it must be placed in a position visible to all
and it may only be removed by the person who attached it.
u Release of stored energy:
Stored energy in the compressed air supply or electrical energy in electrolytic
capacitors must be released by appropriate means.
After switching off the machine, wait until the voltages and the compressed air
have discharged, so that work can be performed without any risk.
u Testing the lock out:
The lock can be easily tested by pressing the START button.
The following steps must be taken to restore the machine to operation.
u Check the working area. Authorized employees should remove all of their tools
and reinstall all safety features.
u Notify all affected employees.
u Before removing even one lock or tag, inform all workers in the affected area
that the machine is going to be restarted.
u Remove all locks/tags.
Every authorized employee must remove his own lock and shut it away.
u Turn the machine on. Make sure that authorized staff check the equipment in
operation to ensure that repairs were performed correctly
Testing
Service personnel may test circuits by energizing them briefly without suspending
the Lock Out / Tag Out Procedure. This may only be done when no other work is
being performed by any other person on the equipment being tested.
It is extremely important that all remote START switches be tagged with the "Do
Not Operate" tag to prevent inadvertent operation of the equipment during these
periods.
Responsibilities
• It shall be the responsibility of the maintenance and service personnel to make
sure this procedure is adhered to.
• It shall be the responsibility of the maintenance and service personnel's imme-
diate supervisor to instruct his personnel on this procedure.
• It shall be the responsibility of the Safety Officer with assistance from the
Safety Committee, Health Service Department, and the various managers and
vice-presidents to administer the Lock Out / Tag Out Procedure.
www.asm-smt.com
Equipment required for Maintenance Workflow 1 SIPLACE SX1/2
Tools Included in head exchange kits
T01 - Vacuum cleaner T04 03034148-xx Calibration jig, version SST23
T02 - Waste bin for nozzles T05 03010565-xx CALIBRATION PART VERSION 3
T03 00377393-xx Anti-static tweezers, Bernstein 5-192 T07 03078400-xx Torque Screwdriver ESD 1,0-5,0 Nm
T18 00378524-xx Pocket scissors T08 03078706-xx Bitholder f. Screwdriver TorqueVario
T20 - Flashlight T09 03073256-xx Extension/ straight TX20
Tool for head exchange if required T14 03080984-xx Protective cover CO sensor CPP
T49 03020832-xx Packaging, C+P, plastics T15 03080081-xx Torx Allen Wrench TX8
T58 03067127-xx Packing compl. / CPP T51 03078596-xx Protective Tubing BE-Sensor CP20
T85 03108670-xx Packaging CP20p cpl. T62 03112729-xx Protective cover CO sensor CP20p
T87 03081725-xx Packing compl. pick+place-module T95 03156306-xx Protective cover CO sensor CP20 P2
T94 03162648-xx Packaging CP20 P2 cpl. Wear parts
K01 - Head Exchange Kit W01 03016831Sxx Nozzle magazine type 10xx
K01a 03109694-xx Head Exchange Kit for CPx W02 03066107-xx Nozzle magazine type 20xx
K01b 03109567-xx Head Exchange Kit option for CP20A W03 - Nozzle magazine with plastic nozzles 20xx/28xx
K01c 03114808-xx Head Exchange Kit option for CP20P W58 03101503-xx Nozzle magazine type 40xx/60xx
K01d 03109570-xx Head Exchange Kit option for CPP W63 03135469Sxx Nozzle magazine type 20xx/20
K01e 03172724-xx Head Exchange Kit option for CP20P2 Consumables
C01 - Sheet of Paper 420x300
C03 03070074Sxx Cleaning Wipe, KM-Wipe
C04 00315253-xx SIPLACE cleaning-tissue
C31 00372972-xx Protective gloves latex
www.asm-smt.com
Head Exchange Kit - Overview