00197795-04_JC_PM_WF1_SX12_EN.pdf - 第35页
10 WF1 SX1/2 Prepare the feeder, return all tables, close the covers and switch on machine. 1.25 min 1 / 2 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e…
www.asm-smt.com
10 WF1 SX1/2 Prepare the feeder, return all tables, close the covers and switch on
machine.
1.25 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON (OFF) Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T1, T18
Wear Part: Consumables:
www.asm-smt.com
1 Remove all loose components from the
feeder modules.
2 Cut the remaining tape directly at the
feeder.
3 After Cutting: Ensure to leave 2 holes
overlapping.
4 Return all COT. 5 Close all covers. 6 If the machine was switched off proceed
with next step otherwise proceed with next
task.
10 WF1 SX1/2 Prepare the feeder, return all tables, close the covers and switch on
machine.
1.25 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON (OFF) Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T1, T18
Wear Part: Consumables:
www.asm-smt.com
7 Switch on the machine. 8 Do not press the start button.