00197795-04_JC_PM_WF1_SX12_EN.pdf - 第32页
www.asm-smt.com
8 WF1 SX1/2 Clean the Y-Axis loose bearing and contact surface. 1 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON (OFF) Transport Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C3
www.asm-smt.com
1 Move all gantries to the end limit. 2 Clean the outer loose bearing at the left
side of gantry.
3 Clean the inner loose bearing at the right
side of gantry.
4 Clean the contact surface over the entire
length.
5 Repeat all steps at the other gantry.
www.asm-smt.com
9 WF1 SX1/2 Clean the conveyor, lifting tables and gantry cables. 1.5 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON (OFF) Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T1
Wear Part: Consumables:
C3
www.asm-smt.com
1 Remove all loose components on and
around the whole PCB conveyor.
2 Clean the gantry cables of the Y-Axis. 3 Clean the gantry cables of the X-Axis.
4 Repeat all steps at the other gantry.