00196775-0102_OM_DockingStation_SX_EN.pdf - 第19页

15 Docking Station for SIPLACE SX Changeover Tables 3 Product Description Operating Manual 3.1 Functional Description 3 Product Description Part No. 00116965-01 docking station for SIPLACE SX changeover tables 3.1 Functi…

2 Operating Safety Docking Station for SIPLACE SX Changeover Tables

2.3 ESD guidelines Operating Manual

2.2.2.2 Warning Label W 203

Part No.: 03009342-01

Label locations: 2x on the docking station for SIPLACE SX changeover tables

– 1x each on the left and right behind the power and data interface on

the housing.

Number per machine: 2

Class: WARNING

CRUSHING DANGER!

Reaching inside may result in injury to arms and hands.

Do not reach into the running machine!

Fig. 2 - 3 Warning label W203, part no. 03009342-01

Fig. 2 - 4 Warning label W203, part no. 03009342-01 - label locations

2.3 ESD guidelines

Please observe the information on the ESD directives as indicated in the operating manual of the

placement system.

Docking Station for SIPLACE SX Changeover Tables 3 Product Description

Operating Manual 3.1 Functional Description

3 Product Description

Part No. 00116965-01 docking station for SIPLACE SX changeover tables

3.1 Functional Description

General

The docking station is an additional component to the pre-setup station. It is the link between the

pre-setup station and the changeover table of the SIPLACE X-series. The docking station allows

the external setup of changeover tables with feeder modules, function tests and setup checks.

Fig. 3 - 1 Docking station for SIPLACE SX

(1) Docking station (5) Sensor for changeover table detection

(2) Changeover table docking device X-series (6) Control buttons

(3) Skid strips for guiding and docking the

component table

(7) EDIF (power and data interface)

(4) Pneumatic cylinder for locking the changeover

table

(8) Adjustable feet for height adjustment and

fastening to the ground

3 Product Description Docking Station for SIPLACE SX Changeover Tables

3.1 Functional Description Operating Manual

The major functions of the docking station are:

– Supplying the changeover table and the X feeder modules with power

– Providing an infrastructure for the communication between the PC of the pre-setup station and

the feeder modules

The user can use the docking station to conduct function tests on the X feeder modules and to

check the setups outside the production environment. For this purpose, two rows each having four

docking stations are connected via the CAN bus of the pre-setup PC. Each docking station has its

own power and compressed-air connections.

The docking station’s changeover table docking device can be adjusted to the desired PCB

conveyor height. The changeover table is pushed into the docking station for the pre-setup. The

changeover table slides by roller bearings mounted to its sides on the rails of the changeover table

docking device to the power and data interface connector (EDIF). The EDIF in the changeover

table docking device is properly positioned to the component table with the EDIF of the feeder

modules.