TRS GEM Manual for Intel Ver 1.1.pdf - 第6页

GEM Manual for DEK P rinters GEM Compliance State ment Issue 1.1 March 20th, 2014 Page 6 of 152 GEM Complianc e Statement The following tables show the f undamental requirements and a dditional capabilities implemented o…

GEM Manual for DEK Printers Introduction

Issue 1.1 March 20th, 2014 Page 5 of 152

Introduction

GEM compatible screen printers manufactured by DEK Printing Machines Ltd. are capable of

operating in co-operation with automatic loading systems and factory hosts. In this manual the

screen printer is referred to as the “equipment”.

This manual describes the host view of the GEM compliant interface provided with the system.

A detailed description of the equipment capabilities is followed by the implemented SECS II

streams and functions list.

The machine variables, alarms and event messages are then listed to enable remote process

control to be achieved.

References:

SEMI E4-91 - SEMI Equipment Communications Standard 1 Message Content (SECS-I)

SEMI E5-96 - SEMI Equipment Communications Standard 2 Message Content (SECS-II)

SEMI E30-95 - The GEM Standard

SEMI E37-0303 – High-Speed SECS Message Services (HSMS) Generic Services

SEMI W39-0703 – Object Services Standard: Concepts, Behaviour and Services

To order the SEMI Publications, contact:

SEMI,

Dept. 05607,

San Francisco,

CA 94139

GEM Manual for DEK Printers GEM Compliance Statement

Issue 1.1 March 20th, 2014 Page 6 of 152

GEM Compliance Statement

The following tables show the fundamental requirements and additional capabilities

implemented on this equipment.

Fundamental GEM Requirement

Implemented

GEM compliant

State models

Yes

Equipment processing states

Yes

Host Initiated S1F13/14 scenario

Yes

Event notification

Yes

On-Line identification

Yes

Error messages

Yes

Documentation

Yes

Control (operator initiated)

Yes

Additional Capabilities

Implemented

GEM compliant

Establish communications

Yes

Dynamic event report configuration

Yes

Variable data collection

Yes

Trace data collection

Yes

Status data collection

Yes

Alarm management

Yes

Remote control

Yes

Equipment constants

Yes

Process program management

Yes

Material movement

Yes

Equipment terminal services

Yes

Clock

Yes

Limits monitoring

Yes

Spooling

Yes

Control (host initiated)

Yes

GEM Manual for DEK Printers Machine GEM Compliance

Issue 1.1 March 20th, 2014 Page 7 of 152

Machine GEM Compliance

GEM Requirement

Equipment Constants (ECIDs)

GemConfigConnect (ECID 1)

DeviceName (ECID 2)

GemEstabCommDelay (ECID 3)

GemPollDelay (ECID 4)

GemInitCommState (ECID 5)

GemInitControlState (ECID 6)

GemOfflineSubstate (ECID 7)

GemOnlineFailed (ECID 8)

GemOnlineSubstate (ECID 9)

received_mode (ECID 10)

inspect_rate (ECID 11)

batch_limit (ECID 12)

process_adjustments (ECID 13)

MaxSpoolTransmit (ECID 14)

OverWriteSpool (ECID 15)

spooling_enabled (ECID 16)

TimeFormat (ECID 40)

RunGEMRemote (ECID 41)

CompoundProductFiles (ECID 46)

Make (ECID 50)

Model (ECID 51)

Reserved (ECID 52)

StencilCleaningSystem (ECID 53)

ApplicatorType (ECID 54)

ConveyorType (ECID 55)

TransportMode (ECID 56)

MachineUnits (ECID 57)

UplineProtocol (ECID 58)

DownlineProtcol (ECID 59)

TransferPeriod (ECID 60)

PasteDispensePosition (ECID 61)

ToolingHardware (ECID 62)

FiducialReference (ECID 63)

ProductBarcodeHardware (ECID 64)

RemoteBarcodeHardware (ECID 65)

AdvancedProFlow (ECID 66)

PressureHardware (ECID 67)

PasteDispenser (ECID 68)

ScreenSize (ECID 69)

RollHeightHardware (ECID 70)

RollHeightMonitor (ECID 72)

ConsumableAction (ECID 73)

VacuumHoldTime (ECID 74)