Nordson_EFD_Medical_Device_Assembly_White_Paper.pdf - 第10页
Thanks for Reading! We hope you found this information helpful. If you are not satisfied with the performance of your current dispense valve system, we invite you to discuss your application with one of our experienced P…

9 www.nordsonefd.com
Should You Replace Your Current Dispense Valve System?
In the middle of coping with day-to-day production challenges, it can be difficult to calculate just how
much poor valve performance is really costing you.
However, doing so could save you money, increase production, reduce bottlenecks, and improve the
overall quality of your products. It may be worth tracking valve-related problems for a week or so, then
converting them into a yearly expenditure.
Some key points to analyze:
• Howmuchtimeandlaborareyouspendingonvalvesetup?
• Howmucharevalve-relateddowntimeandmaintenancelaborcostingyouperyear?
• Ismostofyourvalvemaintenancescheduled,ordoyourvalvesbreakdownunexpectedly?
• Ifyourcurrentvalvesmakeithardtocontrolshotsize,howmuchareyouspendingonvalve-
related rework, rejects, and cleanup?
• Areyourdispensingstationscausingabottleneck?
• Areyouwastingexpensiveassemblyfluid?
• Doyouhaveanyvalve-relatedsafetyissues–spills,fumes,storage/disposalofhazardouswaste?
Depending on the responses you come up with, the most cost-effective solution may be to install a
more accurate and reliable dispense valve system.
In many instances, the savings will pay for the new equipment in a surprisingly short time and continue
to reduce operating expenses year after year.
10. How Often Do Your Valves Require Maintenance?
All valves will eventually require maintenance, but some designs require more
frequent repair than others. Here are some things to consider:
• Howoftenismaintenancerequired?Whileawell-engineeredvalvedesign
will go tens of millions of cycles without any degradation in performance or
accuracy, others may require maintenance after they have been shut down
over the weekend, or even at the start of every shift.
• Ifvalvemaintenanceisrequired,canitbeperformedonsite,ordoesthe
valve have to be returned to the manufacturer?
• Ifservicecanbeperformedonsite,howcomplicatedisit?Canyousimply
removethefluidheadwithoutdismountingthevalve?Ordoesthevalve
have to be removed from the mounting fixture and taken apart? With some
high-performance designs, routine maintenance is as simple as replacing the
dispense tip.
• Sparepartsprovidedbylocalmachineshopsmaynotalwaysbereadily
available. This delay could lead to line downtime when replacement parts
are needed. Using engineered products that have an abundant supply of
replacement parts can add significant value.
If you’re spending too much time and money keeping your valves up and
running, it might be worth looking at a more reliable, low-maintenance design.
Required maintenance can greatly vary
between valve systems.

Thanks for Reading!
We hope you found this information helpful.
If you are not satisfied with the performance of your current dispense valve system, we invite you to discuss
your application with one of our experienced Product Application Specialists.
EFD offers dispensing solutions for the following applications:
There is no cost or obligation for this service, and your information will be treated as confidential. Qualified
applications may be eligible to try an EFD dispense valve system under our no cost-evaluation program.
For more information, visit Nordson EFD on the web at www.nordsonefd.com, www.facebook.com/NordsonEFD
or www.linkedin.com/company/nordson-efd or contact us at info@nordsonefd.com,
+1 401.431.7000 or 800.556.3484.
• Catheters
• Pacemakers
• Contactlensesandpackages
• Vialfilling
• Syringelubrication
• Stentcoating
• Membranes
• Surgicalanddentaltools
• Diagnosticequipment
• Respirationdevices
• Defibrillators
• Hearingaids
• Pillsandmedicines
• NeedleBonding
• BloodCollectionTubes
www.nordsonefd.com 10

NOTES