5OM-1343-008_w.pdf - 第24页

Safe-13 AKFE-ID Safety Precautions Alert Indications described as " CAUTION " (continuted) Alert Description Related Items Strong Magnetism • Do not bring any metal of high magnetizability close to this. Otherw…

100%1 / 219
Safety Precautions
Safe-12
AKFE-ID
Alert Indications described as "
CAUTION
"
Alert Description Related Items
Avoid hand and nger injuries.
•
Becareful
toavoidhandandngerinjurieswhenclosingthecovers
(door type).
•
Holdthehandgriprmlyandopenorclosethecover(doortype)
slowly.
"2.2.3" in
"Chapter 1 (Vol. 1)"
WhenthegreenlampofthelighttowerisONorickering(ONand
OFF), it indicates that the static machine is in the "Automatic" mode
(standby mode).
"2.3.2" in
"Chapter 1 (Vol. 1)"
Before performing any work, conrm that the "LOCK" lamp on
the operation panel is "ON" (green).
•
If the "LOCK" lamp is not turned on, the machine can
be operated at any time from both front and rear sides,
endangering the operators around the machine.
•
Before performing any setup work, etc., with the machine
powered, be sure to press the [PNL CHANGE] button on either
the front or the rear operation panel and conrm that the [LOCK]
lamp is turned "ON".
"2.3.4" in
"Chapter 1 (Vol. 1)"
Be sure not to detach the transparent cover located above the
conveyor.
Otherwise, part of your clothes or hair might get caught by
the conveyor, causing an injury.
"2.4.2" in
"Chapter 1 (Vol. 1)"
When a PCB is trapped in the PCB receiving area between the
main machine and the input or the output machine, be sure to
stop the machine before removing the PCB.
Dependingonhowtheoutputsystemsarespeciedfortheinputand
output machines, the related conveyor may start running in the Y
direction for PCB Y-position arrangement at the moment when the
trappedPCBisremoved,causingyournger(s)togetcaughtinthe
conveyor.
"2.4.2" in
"Chapter 1 (Vol. 1)"
0607-003
Safe-13
AKFE-ID
Safety Precautions
Alert Indications described as "
CAUTION
" (continuted)
Alert Description Related Items
Strong Magnetism
•
Do not bring any metal of high magnetizability close to this.
Otherwise, such metal will easily be magnetized and attracted,
causing an injury to the operator or breakdown of the machine.
•
Do not bring any object such as a magnetic card and a watch
close to the machine.
The data of the magnetic card might be cleared or a watch, etc., may
be damaged due to the strong magnetism.
"2.4.4" in
"Chapter 1 (Vol. 1)"
When a tape feeder is attached or detached, be sure not to
drop it.
Otherwise, a foot injury will result or the feeder itself may be
damaged.
Carefully handle each feeder one by one and do not drop any.
"2.4.8" in
"Chapter 1 (Vol. 1)"
"2.1" in
"Chapter 2 (Vol. 1)"
"2.4" in
"Chapter 3 (Vol. 1)"
Hazardous to your hands and ngers!
Be sure to hold the handle to move the bank feeder change cart.
"2.4.8" in
"Chapter 1 (Vol. 1)"
"2.4" in
"Chapter 3 (Vol. 1)"
Watch your step!
·
Be careful not to hit your foot against the cart while moving the bank
feeder change cart.
Especially
, the resistance against cart movement may change rapidly
whenthe
oorisraggedandthecartgetscaughtontheooror
a sheet is used and the cart gets caught at the edge or a slackened
portion of the sheet.
"2.4.8" in
"Chapter 1 (Vol. 1)"
"2.4" in
"Chapter 3 (Vol. 1)"
Do not put your hand in the moving area while the feeder base is
moving up or down.
WhiletheLEDofa[FEEDERREADY]switchisbeingickering,it
indicates that the corresponding feeder base is moving up and down.
"2.4.8" in
"Chapter 1 (Vol. 1)"
0607-004
Safety Precautions
Safe-14
AKFE-ID
Alert Indications described as "
CAUTION
" (continuted)
Alert Description Related Items
Before starting the automatic operation, check carefully that there is no
person around the machine (especially on the other side of the machine
operation). Make sure that no objects (tools, parts, etc.) are left behind.
"1.1.3" in
"Chapter 2 (Vol. 1)"
The padlock key should be kept in such a way that nobody except the
personnel in charge of maintenance can supervise it.
"1.4.3" in
"Chapter 2 (Vol. 1)"
The load power to the motors, etc., is turned OFF but the setup
operation must be performed carefully when you put your hand
inside the machine.
"3.3.1", "3.3.2" and
"3.6" in "Chapter 3
(Vol. 1)"
This setup operation must be performed with your hands inserted
inside the machine.
Open the cover(door type) and perform the setup operation with
the load power supply to the servomotor being turned "OFF".
"5.1.2" in
"Chapter 4 (Vol. 2)"
•
Even when the power breaker is set to "OFF", the primary line
is powered, making it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before
maintenance work.
"1.1" in
"Chapter 1 (Vol. 4)"
•
Residual voltages may remain behind for a few minutes in the
internal devices of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of
theDCpowersupplyandtheservoampliergo"OFF"in10minutes
or more after the power breaker is set to "OFF".
"1.1" in
"Chapter 1 (Vol. 4)"
The load power to the motors, etc., is turned OFF but the
maintenance operation must be performed carefully, protecting
your hands from any injury.
"4.5" in
"Chapter 1 (Vol. 4)"
The light emitter of the linear measure sensor is made of glass.
If the light emitter happens to be damaged, be sure to suck up
the fragments with a vacuum cleaner, etc.
Do not collect the fragments with your bare hands to protect your
hands from injuries.
"4.5" in
"Chapter 1 (Vol. 4)"
0607-004