80S-20用户手册.pdf - 第138页
3 Introduction and basic concepts SIPLACE 80S-20/F4 User Manual 3.3 User interface - views and me nus Software version S R.407.xx 01/2001 US Edition 138 3.3.2.3 "Options" menu The "Opti ons" men u is …
SIPLACE 80S-20/F4 User Manual 3 Introduction and basic concepts
Software version SR.407.xx 01/2001 US Edition 3.3 User interface - views and menus
137
Transport 1 F7 3
Used to call the single functions for PCB conveyor 1 (= right conveyor track in the case of twin
conveyors). These are used to test and set the functional modules for PCB conveyor as well as
to set the conveyor width. 3
NOTE
The next two menu options belong to the group of vision functions.
These functions are used to teach and test fiducials, measure components and change package
form data.
The vision functions cannot be executed at the "Operator" access level. 3
Teach fiducial F8 3
This menu item is used to call the functions for the processing of fiducials for PCB position
detection.
For a more extensive description of the procedure refer to Chapter 6 "Vision Functions". 3
Test component F9 3
This menu item is used to call the functions for the processing of package forms for component
centering.
For a more extensive description of the procedure refer to Chapter 6 "Vision Functions". 3
Start SITEST F10 3
This automatically starts the SITEST test program for machine set-up and calibration.
The user interface, together with the procedure for the execution of the functions, is described in
the separate User’s Manual for the SITEST test program. 3
NOTE
The SITEST test program cannot be started from the "Operator" access level. 3
GEM F11 3
This menu item is used to call the GEM interface functions.
For a more extensive description of the procedure refer to Chapter 12
. 3
NOTE
The GEM interface functions cannot be called unless the GEM interface has been configured.
At the "Operator" access level, only the function "Send and receive messages" is available. 3
3 Introduction and basic concepts SIPLACE 80S-20/F4 User Manual
3.3 User interface - views and menus Software version SR.407.xx 01/2001 US Edition
138
3.3.2.3 "Options" menu
The "Options" menu is only available in the main view. This menu contains all the supplementary
functions. 3
Å Click the required menu item and then make the appropriate settings or selections in the corre-
sponding windows or dialog boxes.
3
3
SIPLACE 80S-20/F4 User Manual 3 Introduction and basic concepts
Software version SR.407.xx 01/2001 US Edition 3.3 User interface - views and menus
139
Machine options... 3
Depending on access level, you can obtain information about the station configuration
("Operator") or activate or deactivate the displayed machine options ("Line engineer", "Service").3
Å Click the menu item Machine options...
The following window is displayed.
3
NOTE
Only those machine options are displayed which are configured at the current station.
The different machine options and the associated functions are described in Chapter 4
Placement
functions, Chapter 11 Station extensions /Hardware, Chapter 6 Vision functions and chapter 12
Station extensions / software. 3
Å Click the checkboxes corresponding to the machine options which you want to activate or
deactivate.
NOTE
At "Operator" access level, it is only possible to activate and deactivate the conveyor interface
options. 3