Printer 600 Machine Overview.pdf - 第9页
0$&+ ,1(29(59,(: 02'8/(29( 59,(:6 Chapter Issue 4 May 03 Technical Reference Manual 3.9 Camera and Vis i on System Module The function of the camera and vi sion system is to supply a visu al indication of scre…
0
$&+,1(29(59,(:
0
2'8/(29(59,(:6
3.8 Technical Reference Manual Chapter Issue 4 May 03
Paste Dispense
Module
The function of the paste dispense module option is to apply a precise amount
of solder paste onto the print screen, the frequency is fully programmable in
software.
Board Support
Tooling Module
The role of the board support tooling is to support the board during the print
cycle, to prevent print distortion caused by flexing of the board as a result of the
downward pressure of the squeegees/ProFlow. Several different types of board
support tooling are available to suit a variety of surface mount process require-
ments.
Rising Table
Module
The rising table module fulfills two functions:
• Provide a stable base for the board support tooling
• Positioning of the board support tooling and the rail system modules during
the print cycle
Print Carriage The print carriage module is the vehicle that enables the squeegee module,
(and paste dispense/ProFlow module options) to carry out their functions:
• Squeegee/ProFlow modules - perform the print stroke and paste knead
sequence.
• Paste dispense module - supply paste at the required position of the print
stroke.
Figure 3-6 Machine Front View
Paste Dispense Module
Board Support ModuleRising Table Module
Print Carriage Module
0$&+,1(29(59,(:
02'8/(29(59,(:6
Chapter Issue 4 May 03 Technical Reference Manual 3.9
Camera and Vision
System Module
The function of the camera and vision system is to supply a visual indication of
screen to board alignment and board and screen inspection data to the vision
card within the machine PC enclosure. The vision card supplies the captured
information to the processor to enable the processor to:
• Utilize the error signal to improve stencil alignment
• Provide visual information for the user on the MMI monitor
When enabled, monitor the printing process to ensure print quality
Screen Change Module
Standard Chase The standard chase enables manual loading and unloading of the print stencils
to the correct position within the chase assembly. With the use of adaptors, the
chase can accommodate the most popular sizes of print stencil.
Adjustable Stencil
Mount
The adjustable stencil mount is a factory fitted chase option enabling manual
loading and unloading of the print stencils to the correct position within the
chase assembly. The module is fully adjustable to accommodate most popular
sizes and thickness of print stencil.
ProFlow Module The ProFlow module is an optional self contained paste transfer unit, employed
to apply solder paste directly to a screen, alleviating the need for squeegees.
Figure 3-7 Machine Plan View
ProFlow Module
Screen Change Module
Front of Machine
Camera and Vision System Module
TM-6EX
0
$&+,1(29(59,(:
0
2'8/(29(59,(:6
3.10 Technical Reference Manual Chapter Issue 4 May 03
Power Supply
Module
Comprising of the two major units within the machine, the module fulfills the
following functions:
• Transform and rectify the mains voltage supply to the voltages required by
the electrical systems throughout the machine.
• Electrical safety - achieved by the use of emergency stop safety circuits (E
Stop). When an E Stop is activated, power is removed from selected areas
of the machine.
Pneumatics
Module
The function of the pneumatics module is to supply regulated air pressure to the
pneumatic devices throughout the machine. The air supply is routed to the
required pneumatic device via an electrically operated solenoid valve controlled
by the machine controller enclosure.
Under Screen
Cleaner
The under screen cleaner module provides the facility to automatically clean the
underside of the stencil so reducing the build up of paste. The frequency and
mode is programmable in software. The screen cleaner is driven across the
underside of the stencil by the camera carriage.
Figure 3-8 Machine Front View
Underscreen Cleaner Module
Power Supply Module
Pneumatics Module