Cleaning SIPLACE Vision camera systems.pdf - 第10页
ASMP T GmbH & Co KG Rupert - Mayer - St raße 48 81379 Munich, Germany Subject to c hange without notice TI2024 - 03E09.doc 09.04.2025 Page 10 - 18 ENABLING THE DIGIT AL WORLD Clean th e splitting mirror as describe d…
ASMPT GmbH & Co KG
Rupert-Mayer-Straße 48
81379 Munich, Germany
Subject to change without notice
TI2024-03E09.doc
09.04.2025
Page 9 - 18
ENABLING THE DIGITAL WORLD
4.5 Cleaning the stationary cameras SST33 / SST36 / SST25 / SST33G (03105198-xx) / SST25G
All three stationary camera types have the same construction.
All the cleaning steps therefore apply to all three types.
Pull off the illumination unit in an
upward direction.
Remove the bottom cover.
The bottom of the cover is inserted in the base
plate and the top is clipped in place at the sides
with two lugs on sprung pins.
The top of
the splitting
mirror is now
free.
ASMPT GmbH & Co KG
Rupert-Mayer-Straße 48
81379 Munich, Germany
Subject to change without notice
TI2024-03E09.doc
09.04.2025
Page 10 - 18
ENABLING THE DIGITAL WORLD
Clean the splitting mirror as described in the Maintenance Manual for the machine.
You can clean the lens of the optics module from the top.
As of approximately 03/2013, the apertures on the lens dolly are sealed.
As of this time, a foam sheet is also fitted to the bottom of the camera for shielding purposes.
NOTE
Cleaning operations at the lens
Only the lens can be cleaned from above.
Neither the camera nor the lens may be removed from the lens-camera-dolly
assembly!
ASMPT GmbH & Co KG
Rupert-Mayer-Straße 48
81379 Munich, Germany
Subject to change without notice
TI2024-03E09.doc
09.04.2025
Page 11 - 18
ENABLING THE DIGITAL WORLD
Dirt can accumulate here on older cameras.
Difficulty accessing the sensor means that you may possibly be unable to clean it properly if it has
already become dirty. You may, however, be able to remove any dust using a vacuum cleaner nozzle
at the aperture slits.
To prevent it becoming dirty again, cover the slits with adhesive tape.