1022330_6 Edison Safety 3 Dec 2015.pdf - 第25页
. . . . . SAFETY (EDISON) Printer Movement Hazards 1022330_6 25 Printer Movement Hazards Hand Crush Hazard W ARNING . B efore performing maintenan ce procedures, yo u may need to reposition printe r component s to gain b…
SAFETY (EDISON)
Electrical Hazards
24 Safety (Edison)
Electrical Hazards
Electrical Hazard
WARNING. High voltage is present on the line (supply) side of the printer main
disconnect switch when the switch is in the OFF position. Turn OFF the main
disconnect switch, lock-out and tag-out the main disconnect switch, and remove the
power cable from its power source before servicing.
Failure to comply could result in serious injury or death.
. . . . .
SAFETY (EDISON)
Printer Movement Hazards
1022330_6 25
Printer Movement Hazards
Hand Crush Hazard
WARNING. Before performing maintenance procedures, you may need to
reposition printer components to gain better access. Stay clear as components move.
Failure to comply may result in personal injury.
Hand Crush Hazard
Caution. Remove power from the printer before you perform maintenance on
internally mounted components. Moveable axes are present that move quickly with
force. Serious injury can occur.
Hand Crush Hazard
WARNING. Moving parts, capable of causing injury, are accessible through the
printer input/output conveyor track openings. Keep hands clear of input/output
conveyor track openings. Failure to comply could result in serious injury.
Hand Crush Hazard
WARNING. Moving Input/Output conveyor rails can cause injury. Conveyor rails
move during initialization, jogging, process changeover, or teaching operations. Keep
hands clear of conveyor rails under these circumstances. Failure to comply could
result in serious injury.
Hand Crush Hazard
WARNING. Moving parts can cause injury. Certain types of motion may be available
with the printer interlocked hood in the open position for the purposes of setup and
troubleshooting. Keep hands clear of moving parts when setting up or troubleshooting
the printer with the hood opened. Failure to comply could result in serious injury.
SAFETY (EDISON)
Chemical Hazards
26 Safety (Edison)
Chemical Hazards
Hazardous Material
Disposal
The following items are considered hazardous material and must be disposed of in
accordance with local regulations:
• Lubricant-contaminated wipes
• Empty paste cartridges
All hazardous materials must be disposed of in accordance with National and Local
regulatory requirements.
Poison
WARNING. Solder paste and other printing medium contain lead and are hazardous
to your health and the environment. Review the Safety Data Sheet before use. Always
wear protective gloves and safety glasses when handling printing medium and make
sure you properly dispose of all waste material according to manufacturer’s
instructions. Failure to comply could result in personal injury and/or damage to the
environment.
Chemical Hazard
Caution. Solvent may cause skin irritation or eye injury. Always wear protective
gloves and safety glasses when handling solvent, and be careful not to spill the
solvent when filling the solvent tank. Review solvent’s Safety Data Sheet before use.
Failure to comply may result in personal injury and/or damage to the environment.
Flammable
WARNING. Isopropyl alcohol is extremely flammable and must not be used in your
solvent system. Use ONLY approved solvents. Failure to comply could result in
personal injury and equipment damage. Contact Speedline for a current list of
approved solvents.
Chemical Hazard
Caution. Remove power from the printer before you use an approved solvent to
clean the printer’s components. Be careful when using solvents as they are
combustible. Use personal protective equipment when cleaning with solvents to
prevent personal injury. Review solvent’s Safety Data Sheet before use.