TM1792_Block skip of the Board Data after Block Offset Distribution.pdf - 第7页
SMT Software Engineeri ng Group IMOperationsYAMAHAMOTORCO. ,LTD. MD OC-SOFT50052 7/7 3.4. Disabli ng the fun ction T o di s able the function, please tap [Se tup] – [Block Skip] button (Ref e r…
SMT Software Engineering Group
IMOperationsYAMAHAMOTORCO.,LTD.
MDOC-SOFT50052
5/7
Please refer to column [Board] – [Mount] – [Original Block No] when you want to check the
mount data which are belonging tothe blocks. (Refer to Fig 3.4)
Fig 3.4 Original Block No
3.3. Operation of enabling the function
3.3.1. Confirming the state of the skip
To confirm the state of the skip, please confirm [Board] – [Mount] – [Skip] column.
The row which is skipped with the block unit is displayed as “Skip”, you cannot edit it on this
screen. (Refer to Fig 3.5)
Fig 3.5 State of skip
SMT Software Engineering Group
IMOperationsYAMAHAMOTORCO.,LTD.
MDOC-SOFT50052
6/7
3.3.2. Starting auto-running
When the [START] button is pressed after [Setup] – [Block Skip] button is changed to “ON”, the
confirming message is displayed only once. (Refer to Fig 3.6)
Please confirm the state of the skip on [Board] – [Mount] screen. (Refer to 3.3.1 Confirm the state
of skip) And continue if it is an intended setting.
Fig 3.6 Confirming message
3.3.3. Other operations
The mount data skipped by this function are not mounted as well as checking on [Board] -
[Mount] - [Skip].
SMT Software Engineering Group
IMOperationsYAMAHAMOTORCO.,LTD.
MDOC-SOFT50052
7/7
3.4. Disabling the function
To disable the function, please tap [Setup] – [Block Skip] button(Refer to Fig 3.7) to change from
“ON” to “OFF” (Refer to Fig3.8).
Also, when a board data which is different board name is loaded or when the power supply is
turned off, this function becomes invalid.
In this case, [Setup] – [Block Skip] button isautomatically retuned to “OFF”.
When [Setup] – [Block Skip] button is “OFF”. The skip by block unit is not executed
Fig 3.7 The state of the Block Skip button is “ON”
Fig 3.8 The state of the Block Skip button is “OFF”
4. Limitations
There are no limitations.