00198108-01_JC_PM_WF3_TX_EN.pdf - 第24页
www.asm-smt.com
4 WF 3 TX-Series Maintenance Empty and clean nozzle reject bin 2 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T2
Wear Part: Consumables:
C3
www.asm-smt.com
1 Remove the nozzle reject bin. 2 Empty the reject bin into a waste box. 3 Clean the reject bin.
4 Return the reject bin and repeat steps for
all gantries.
www.asm-smt.com
5 WF 3 TX-Series Maintenance Remove the CPP head 12 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T7, T8, T9, T62, T49
Wear Part: Consumables:
www.asm-smt.com
1 Move the Y-gantries to outer limit. 2 Fit the component sensor protection cap. 3 Move the gantries to a good working posi-
tion.
4 Unplug the compressed air connections
from the head.
5 Disconnect the ribbon cables. 6 Unplug the 2 camera cables.