00198108-01_JC_PM_WF3_TX_EN.pdf - 第39页
12 WF 3 TX-Series Maintenance Check and replace compressed air filter 3 min 1 / 3 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e n …
11 WF 3 TX-Series Maintenance Clean/ replace the head exhaust filter 5 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T31
Wear Part:
W21
Consumables:
C19
www.asm-smt.com
7 Return the filter. 8 Fix the screw.
12 WF 3 TX-Series Maintenance Check and replace compressed air filter 3 min 1 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part:
W20
Consumables:
www.asm-smt.com
1 If necessary remove the side panel cover. 2 Turn off air. Push the lever to horizontal. 3 Push the activator.
4 Check the manometers. 5 Release (2) and twist the protection cap
(2).
6 Unscrew container and remove.
12 WF 3 TX-Series Maintenance Check and replace compressed air filter 3 min 2 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part:
W20
Consumables:
www.asm-smt.com
7 Unscrew the filter. 8 Check the filter for contamination. 9 If OK return it to the filter unit.
10 If NOT OK replace it with a new one. 11 Screw the filter on by hand. 12 Return and screw container.