00198622-01_IM_WES7_WIN10_DE_EN.pdf - 第12页
WES7 / Win10 - Installation Manual 11/2018 Edition 12 4.2 BIOS Update/Set tings A BIOS update shall o nly be performed if requested. No BIOS updates have to be performed on the current comput ers at present. ► Perform th…
WES7 / Win10 - Installation Manual 11/2018 Edition
11
4 Installation
4.1 Overview
Choose computer configuration
SIPLACE WES7
Configurator
SIPLACE Win
10 Configurator
Install and calibrate Touchscreen
BIOS settings on the
Station
/
Coplan
/
BulkFeeder X computer
Perform BIOS settings
Back up the machine data
BIOS update
on the
Station /
Coplan
/
BulkFeeder X computer
Perform
BIOS
update
Install WES
7/
Win
10
(
DVD or USB stick
suitable for the
computer)
Restore the initial configuration
See section 4.2.
See section 4.2.
Installing the operating system, see section 4.3.
See section 4.3.3.
See chapter 5.
Figure 4-1: Installation
WES7 / Win10 - Installation Manual 11/2018 Edition
12
4.2 BIOS Update/Settings
A BIOS update shall only be performed if requested. No BIOS updates have to be performed on
the current computers at present.
► Perform the BIOS settings as follows.
The following steps have to be performed before installing Windows Embedded Standard 7:
► Press the F2 key to access BIOS after the computer has started.
► Press the F9 key (Setup Default) to set the default settings.
► Change the BIOS settings as described in the following section.
4.2.1 BIOS Settings for SIMATIC BoxPCs 627B / 827B
► Set the following values in BIOS:
Under Main / Hardware Options:
PCI-MPI/DP [ Disabled ]
Safecard Functions [ Disabled ]
Fan Control [ Enabled ]
Under Advanced / SATA/PATA Configuration:
SATA Controller Mode [ Compatible ]
Under Advanced:
Core Multi-processing [ Enabled ]
Under Boot the following boot priority sequence:
1: USB CDROM: 2: SATA0: xxxxxxxxxx 3: ......
Under Exit / Profile:
Profile: [User]
► Exit BIOS with Exit / Exit saving changes / Yes.
WES7 / Win10 - Installation Manual 11/2018 Edition
13
4.2.2 BIOS Settings for SIMATIC BoxPCs 627C / 827C
► Set the following values in BIOS:
Under Power:
Wake up on PME/LAN 2 [ Disabled ]
Under Boot:
USB-Boot [ Enabled ]
Under Boot / Legacy Boot Type Order the following boot priority sequence:
1: USB ODD
2: SATA0 HDD
3: ...
Under Advanced / CPU-configuration:
CMP-Support (= Core Multi Processing)
[ Auto ]
► Perform the following items unter Exit successively:
► Confirm Save User Profile with [Yes].
► Confirm Load User Profile with [Yes].
► Exit BIOS with Exit / Exit saving changes / Yes.
4.2.3 BIOS Settings for SIMATIC BoxPC 627D / 827D
All required settings have been set by default (factory settings).
4.2.4 BIOS Settings for iBASE PCs
All required settings have been set by default (factory settings).
4.2.5 BIOS Settings for SIMATIC MicroBox 427D
► Set the following values in BIOS for the TX-series placement machines:
Under Advanced / USB Configuration:
XHCI [Disabled] (= disabling USB 3.0)