00198622-01_IM_WES7_WIN10_DE_EN.pdf - 第20页

WES7 / Win10 - Installation Manual 11/2018 Edition 20 The following windo w is displayed : Figure 4-11: Operator c onfigu ration Win10 finished ► Click OK . ► Log in as ASM _Admin after the automati c sign out . As soon …

WES7 / Win10 - Installation Manual 11/2018 Edition

After the reboot, you are logged in as Operator (station computer) or the Windows login window is

displayed (Coplan / BulkFeeder X computer).

At the station computer under Windows Embedded Standard 7, you will be automatically logged

out after a few seconds and prompted to log in as ASM_Admin.

Figure 4-8: Automatic logoff WES7

Under Windows 10 IoT, you must wait for the following window (takes a few seconds):

Figure 4-9:Confirming Registry settings Win10

► Click OK.

The following window is displayed:

Figure 4-10: User Account Control Win10

► Enter the operator password.

► Click Yes.

WES7 / Win10 - Installation Manual 11/2018 Edition

The following window is displayed:

Figure 4-11: Operator configuration Win10 finished

► Click OK.

► Log in as ASM_Admin after the automatic sign out.

As soon as the following window is displayed, the configuration has finished, and you can close the

window.

Figure 4-12: Operating system configuration Win10 finished

► If the machine is equipped with a Multitouch Monitor or no touch screen is used (Coplan /

BulkFeeder X computer), remove the software CD from the DVD drive or release the USB stick

and remove it from the USB interface.

► If a touch screen driver must be installed, follow the instructions in chapter 5.

The installation and configuration of the Windows operating system (WES7, Win10) is completed

now.

If you have installed the Windows operating system on a station computer:

► Install the SIPLACE machine software as described in the installation manual for the station

software.

If you have installed the Windows operating system on a Coplan / BulkFeeder X computer:

► Follow the instructions in the respective Assembly Instruction for the 3D Coplanarity Module,

item no:s. [00195344-xx] (for X-series), [00196842-xx] (for SX1/SX2) and [00197395-xx] (for

X-series S) or the instructions in the Operating Manual for BulkFeeder X, item no. [00198045-

xx] if you install the Windows operating system on a Coplan or BulkFeeder X computer.

► Install the SIPLACE machine software as described in the installation manual for the station

software.

WES7 / Win10 - Installation Manual 11/2018 Edition

5 Installing and Calibrating the Touch Screen

Now the touch screen can be installed and calibrated (station computer only). For this, perform the

following steps:

► Log on as ASM_Admin and enter a password.

► In the SIPLACE Configurator, click on the Add-ons and Touch Screen Driver button under

Optional Installation to select and install a touch screen driver. Follow the installation

instructions.

► After installation, calibrate the touch screen as described in the installation manual for the

station software.

► Remove the software CD from the DVD drive or release the USB stick and remove it from the

USB interface.