09_SM481_Service_Manual Feeder_Base.pdf - 第6页

在线预览 09_SM481_Service_Manual Feeder_Base.pdf PDF 文档。

Table of Contents

9-1

Table of Contents

Main Contents

Table of Contents ................................................................................................ 9-1

Main Contents ................................................................................................ 9-1

Chapter 9. Feeder Base ........................................................................................... 9-3

9.1. Feeder Control Board ............................................................................. 9-3

9.1.1. Required Tools ........................................................................................ 9-3

9.1.2. Feeder Control Board Replacement Procedure ...................................... 9-3

9.2. Feeder Base Module .............................................................................. 9-5

9.2.1. Required Tools ........................................................................................ 9-5

9.2.2. Feeder base module Replacement Procedure ........................................ 9-5

9.3. Feeder Base Board ................................................................................ 9-8

9.3.1. Required Tools ........................................................................................ 9-8

9.3.2. Feeder base board Replacement Procedure .......................................... 9-8

Feeder Base

9-3

Chapter 9. Feeder Base

9.1. Feeder Control Board

9.1.1. Required Tools

 Wrench

 T wrench (other tools supplied) or hex wrench

 Screw driver with “+” shaped tip

9.1.2. Feeder Control Board Replacement Procedure

1. Turn Off the PC in normal way. Then turn off the main switch on the front side of the machine.

2. Unscrew the fixing screws securing the cover and remove it using a crosshead (Phillips)

screwdriver.

Upper RL Cover

Upper FL Cover