09_SM481_Service_Manual Feeder_Base.pdf - 第8页

Advance d High Speed Flex i ble Mounter 9-4 3. Disconne ct t he conne ct ors connec t ed to the F eede r Cont rol Bo ar d and F eede r Input EXT Board. 4. Un scr ew the fixing b ol ts securing the board using a he x wren…

Feeder Base

9-3

Chapter 9. Feeder Base

9.1. Feeder Control Board

9.1.1. Required Tools

 Wrench

 T wrench (other tools supplied) or hex wrench

 Screw driver with “+” shaped tip

9.1.2. Feeder Control Board Replacement Procedure

1. Turn Off the PC in normal way. Then turn off the main switch on the front side of the machine.

2. Unscrew the fixing screws securing the cover and remove it using a crosshead (Phillips)

screwdriver.

Upper RL Cover

Upper FL Cover

Advanced High Speed Flexible Mounter

9-4

3. Disconnect the connectors connected to the Feeder Control Board and Feeder Input EXT Board.

4. Unscrew the fixing bolts securing the board using a hex wrench and remove it.

5. Replace the board with a new one.

Reference

The part number of the board is AM03-000819A, J91741071A

6. The assembling is performed in the reverse order of disassembling.

Left Feeder

Base Board

Output

Right Feeder

Base Board

Output

Left Feeder

Base Board

Input

Right Feeder

Base Board

Input

Rear Feeder

IO Board

Feeder Extension

Board

Feeder Base

9-5

9.2. Feeder Base Module

9.2.1. Required Tools

 Wrench

 T wrench (other tools supplied) or hex wrench

 Screw driver with “+” shaped tip

9.2.2. Feeder base module Replacement Procedure

1. Turn Off the PC in normal way. Then turn off the main switch on the front side of the machine.

2. Unscrew the fixing screws securing the cover and remove it using a crosshead (Phillips)

screwdriver.

Upper RL Cover

Upper FL Cover