Smart Feeder 24 mm E - Removing and Fitting the Stripping Device Foil Disposal.pdf - 第3页

E-by SIPLACE Smart Feeder 24 mm E Stripping Device Foil Disposal Part Exchange T1 – Flat Bladed Screwdr iver T2 – Split Pin Punch Size 1.4 T3 – Phillips Screwdriver T4 – TORX screwdriver size T8 T5 – Tweezers

All names identified by ® are registered trademarks of ASM Assembly Systems Singapore Pte Ltd. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could

violate the rights of the owner.

We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information

in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.

ASM Assembly Systems Singapore Pte Ltd

535 Yishun Industrial Park A

ASM Tech-Park Building 2

Singapore 768775

Item no.:

www.e-by-siplace.com Printed by ASM Assembly Systems

E-by SIPLACE Smart Feeder 24 mm E Stripping Device Foil Disposal

Part Exchange

T1 – Flat Bladed Screwdriver T2 – Split Pin Punch Size 1.4 T3 – Phillips Screwdriver T4 – TORX screwdriver size T8

T5 – Tweezers

E-by SIPLACE Smart Feeder

24 mm E

Removing the Stripping Device Foil Disposal

Part Exchange

1/8

CAUTION! Refer to safety instructions in user manual before working on the machine.

ESD guidelines are to be followed

Tool:

T1,T2,T3.T4

Wear Part: Consumables:

1. Loosen the rocker axle with T1. 2. Press the rocker axle from the left side with

T2.

3. Remove the rocker axle.

4. Lift up the rocker. 5. Remove these 4 screws with T3 and T4. 6. Remove these 2 screws with T3.