20200227103734031.pdf - 第9页
牌号 Grade A ISO 分类分 组代号 ISO Code 牌号 Grade 物理力学性能 Physical and mechanical properties 推荐用途 Applications recommended 密度 Density g/cm 3 硬度 Hardness HRA 抗弯强度 TRS MPa P10 YT05 12.6 92.5 1260 适用于钢、铸钢的精加工，宜采用较高的切削 速度和低进给低切深 It is…
牌号
Grade
A
81系列 Series 81
81-F 81-G 81-K 81-L 81-1 81-2
C28 C29 C29 C30 C30 C31 C31
81-3
8301 8302 8303 8304 8305 8306
C35
C35 C36 C36 C37 C37 C38
8307
89-0000 89-1000 89-1000 89-2000
89-3000/4000
89-5000
C42 C42 C43 C43 C44 C45 C45
89-6000
85- AR 85-C 85-D 85-ER 85-EL
C39 C40 C40 C41 C41
81-4
8308
89-7000
81-5 81-6 81-7 81-8 81-9
C32
C38
C45
C32 C33 C33 C34 C34
硬质合金焊接刀片
Cemented Carbide Brazed Tips
83系列 Series 83
85系列 Series 85
89系列 Series 89
产品预览
Product overview
A
04
牌号
Grade
A
ISO 分类分
组代号
ISO Code
牌号
Grade
物理力学性能
Physical and mechanical
properties
推荐用途
Applications recommended
密度
Density
g/cm
3
硬度
Hardness
HRA
抗弯强度
TRS
MPa
P10
YT05 12.6 92.5 1260
适用于钢、铸钢的精加工，宜采用较高的切削
速度和低进给低切深
It is suitable for nishing of steel and casting
steel machining, high cutting speed, small
feed rate and low depth is recommended.
YT15 11.3 91 1300
适用于钢、铸钢的半精加工，宜采用中等进给
量和较高的切削速度
It is suitable for semi-finishing of steel and
casting steel machining, high cutting speed,
medium feed rate is recommended.
P20
YC201 11.79 91.8 1400
适用于钢、铸钢、不锈钢的半精加工和轻载粗
加工，是适用性较好的通用牌号
It is suitable for semi-finishing and light
roughing machining of steel, casting steel and
stainless steel. It is a suitable grade for a wide
application.
YT14 11.4 90.5 1400
适用于钢、铸钢的半精加工
It is suitable for semi-finishing of steel and
casting steel.
P30
YT5 12.8 89.5 1570
适用于钢、铸钢的重切削加工，在作业条件不
好的中、低速度大进给量粗加工。
Suitable for the heavy duty rough turning of
steel and cast steel with a big feed rate at a
medium and low speed under unfavorable
working conditions.
P40
YC40 13.15 89.5 1650
适用于钢、铸铁的重力切削，可采用大切削用
量，亦用于不锈钢、合金钢的半精加工和轻载
粗加工
It is suitable for the heavy duty turning of steel
and also for semi-nishing and light roghing
of stainless steel and alloy steel.
YC45 12.75 90 2250
适用于钢、铸钢的重力切削，可采用大切削用
量，亦用于端面铣削。
Suitable for the heavy duty turning of steel
and cast steel with a big feed rate and also for
face milling.
刀片牌号物理力学性能及用途推荐
Physical and mechanical properties of grades for cemented carbide
inserts and their applications recommended
A
05
牌号
Grade
A
ISO 分类分
组代号
ISO Code
牌号
Grade
物理力学性能
Physical and mechanical
properties
推荐用途
Applications recommended
密度
Density
g/cm
3
硬度
Hardness
HRA
抗弯强度
TRS
MPa
M05
YS8 13.9 92.5 1720
适用于铁基、镍基高温合金、高强度钢的精加
工，亦适用于冷硬铸铁、耐热不锈钢、高锰
钢、淬火钢的精加工。
It can be used for the nishing of iron based
and nickel based high-temperature alloys and
high-strength steel and it can also be used for
the nishing of chilled cast iron, heat resistant
stainless steel, high manganese steel and
hardening steel.
M10
YW3 12.9 92 1390
适用于不锈钢、普通合金钢的精加工和半精加
工。
Suitable for the nishing and semi-nishing of
stainless steel and conventional alloy steel.
YW1 13 91.5 1290
适用于不锈钢、普通合金钢的半精加工。
It is suitable for semi-finishing of stainless
steel and general alloy steel machining.
M20
YM201 13.9 93.0 1600
适用于铁基、镍基高温合金、高强度钢、冷硬
铸铁、耐热不锈钢、高锰钢、淬火钢的半精加
工，是适用性较广的通用牌号。
It is suitable for semi-finishing of Fe, Ni
high temperature alloy, cold hard cast irons,
stainless steel with good heat-resistance and
nonferrous metal. It is a wide application.
YS2T 14.4 91.5 1960
适用于不锈钢、低合金钢、铁基合金的精加工
和半精加工。
It is suitable for nishing and semi-nishing of
stainless steel, alloy steel, Fe alloy.
YW2 12.9 90.5 1460
适用于不锈钢、合金钢的半精加工和轻载粗加
工。
It is suitable for semi-finishing and light
roughing of stainless steel and alloy steel.
M30
YS25 13.0 90.5 1780
专用于不锈钢、钢、铸钢的铣削加工
It is used for milling machining of stainless
steel, steel and casting steel.
YS30 12.8 90 1650
适用于不锈钢、合金钢的轻载粗加工
It is suitable for semi-finifishing and light
roghing of stainless steel and alloy steel.
刀片牌号物理力学性能及用途推荐
Physical and mechanical properties of grades for cemented carbide
inserts and their applications recommended
A
06