213155.pdf - 第13页

Accessories DQ12 Series Sensor

www.bannerengineering.com

Model Description Pieces

Reduced Sensor Range

(Two Apertures Used)

Circular



APQ12-.5

0.5 mm (0.02 in)

diameter

10 60mm(2.4in)

APQ12-1 1mm(0.04in)diameter 10 190mm(7.5in)

APQ12-1.5

1.5 mm (0.06 in)

diameter

10 400mm(15.7in)

APQ12-2 2mm(0.08in)diameter 10 725mm(28.5in)

Horizontal Slot

APQ12-.5H 0.5mm(0.02in) 10 350mm(13.8in)

APQ12-1H 1mm(0.04in) 10 725mm(28.5in)

Vertical Slot

APQ12-.5V 0.5mm(0.02in) 10 450mm(17.7in)

APQ12-1V 1mm(0.04in) 10 900mm(35.4in)

Protective Jacket

APQ12-4S 4mm(0.16in)square 10 2000mm(78.7in)

APKQ12

Kit containing two of each

apertureabove

18 —

06-May-25 page12of13

DQ12 Series Sensor

www.bannerengineering.com

Chapter Contents

Clean with Mild Detergent and Warm Water ...................................................................................................................................................... 12

Repairs ............................................................................................................................................................................................................... 12

Contact Us.......................................................................................................................................................................................................... 12

Banner Engineering Corp Limited Warranty....................................................................................................................................................... 12

Clean with Mild Detergent and Warm Water

Handle the sensor with care during installation and operation. Sensor windows soiled by fingerprints, dust, water, oil, etc.

create stray light that may degrade the peak performance of the sensor.

Wipe down the device with a soft cloth dampened with a mild detergent and warm water solution. Do not use any other

chemicals for cleaning.

Repairs

Contact Banner Engineering for troubleshooting of this device. Do not attempt any repairs to this Banner device; it contains

no field-replaceable parts or components. If the device, device part, or device component is determined to be defective by a

Banner Applications Engineer, they will advise you of Banner's RMA (Return Merchandise Authorization) procedure.

IMPORTANT: If instructed to return the device, pack it with care. Damage that occurs in return shipping is

not covered by warranty.

Banner Engineering Corp. headquarters is located at: 9714 Tenth Avenue North | Plymouth, MN 55441, USA | Phone: + 1

888 373 6767

For worldwide locations and local representatives, visit www.bannerengineering.com.

Banner Engineering Corp Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner

Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been

defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner

product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT

LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF

PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING

CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY

INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE

PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any

product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for

personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product

without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change;

Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that

which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com.

For patent information, see www.bannerengineering.com/patents.

Product Support and Maintenance

Chapter 5

X (formerly Twitter)

Facebook