00194598-01.pdf - 第3页

Keramikszbs trat-Zentrierung / Ceramic sustrate c entering S-27 HM Nachrüstanleitung / Retrofit Instructions Ausgabe 12/2004 Edition 3 Inhalt / Content s 0 Seit e/P age 1 Nachrüstanleitung Keramik substrat-Zentrierung SI…

100%1 / 66
(Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und
Mitteilung ihres Inhalts sind nicht gestattet, soweit nicht ausdrücklich
zugestanden.
Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vor-
behalten, insbesondere für den Fall der Patenterteilung oder GM-Ein-
tragung.)
(Wir haben den Inhalt der Druckschrift auf Übereinstimmung mit der
beschriebenenHard- und Software geprüft. Dennoch können Abwei-
chungen nicht ausgeschlossen werden, so daß wir für die vollständige
Übereinstimmung keine Gewähr übernehmen. Die Angaben in dieser
Druckschrift werden jedoch regelmäßig überprüft und notwendige
Korrekturen sind in den nachfolgenden Auflagen enthalten.
Für Verbesserungsvorschläge sind wir dankbar.)
SIEMENS AG 2004 All rights reserved Technische Änderungen vorbehalten
Artikel-Nr.: 00194598-01 Siemens Aktiengesellschaft
Bestellung an:
SIEMENS L&A
Electronics Assembly
Rupert-Mayer-Strasse 44
D-81359 Muenchen
Printed in the Federal Republic of Germany
(The reproduction, transmission or use of this document or its
contents is not permitted without written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or design,
are reserved.)
(We have checked the contents of the printed document to ensure that
it is in agreement with the hardware and software described therein.
However, since discrepancies cannot be ruled out, we cannot assume
responsibility for complete agreement.
The information given in this printed document is however regularly
reviewed and necessary corrections included in subsequent editions.
We would appreciate any suggestions for improvements.)
SIEMENS AG 2004 All rights reserved Subject to change without prior notice
Order No.: 00194598-01 Siemens Aktiengesellschaft
To be ordered from:
SIEMENS L&A
Electronics Assembly
Rupert-Mayer-Strasse 44
D - 81359 Muenchen
Printed in the Federal Republic of Germany.
Keramikszbstrat-Zentrierung / Ceramic sustrate centering S-27 HM Nachrüstanleitung / Retrofit Instructions
Ausgabe 12/2004 Edition
3
Inhalt / Contents 0
Seite/Page
1 Nachrüstanleitung Keramiksubstrat-Zentrierung SIPLACE S-27 HM . . . . . . . . . 5
1.1 Übersicht . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1.1 Mögliche Zentrierarten. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.1.2 Technische Daten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.2 Sicherheitshinweis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.2.1 Definitionen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.3 Benötigte Teile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.3.1 Inhalt Nachrüstsatz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.3.2 Benötigte Werkzeuge und Verbrauchsmittel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.4 Vorbereitende Arbeiten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1.5 Mechanischer Umbau . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1.5.1 Einbau der Wegbegrenzung des Hubtischs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1.6 Ansprechabstand des Näherungsschalters einstellen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
1.7 Anpassung an die Substratgröße . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
1.8 Pneumatikplan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
1.9 Stromlaufplan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
1.10 Aktivierung der Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
1.10.1 Übersicht . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
1.10.2 Aktivierung und Konfiguration der Keramiksubstratzentrierung . . . . . . . . . . . . . . . 29
1.11 Überprüfung der Funktion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
1.11.1 Überprüfung der Funktion der X-Zentriereinheit, ohne Substrat . . . . . . . . . . . . . . . 32
1.11.2 Überprüfen der Gesamtfunktion und der Stopper-Position, mit Substrat . . . . . . . . 33
Nachrüstanleitung / Retrofit Instructions Keramikszbstrat-Zentrierung / Ceramic sustrate centering S-27 HM
Ausgabe 12/2004 Edition
4
1.12 Fehlermeldungen, mögliche Ursachen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
1.13 Instandhaltung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2 Retrofit instructions: ceramic substrate centering for SIPLACE S-27 HM. . . . . 35
2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
2.1.1 Possible centering modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
2.1.2 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
2.2 Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
2.2.1 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
2.3 Parts required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
2.3.1 Contents of retrofit kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
2.3.2 Tools and consumables required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
2.4 Preparatory work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
2.5 Mechanical conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
2.5.1 Installing the lifting table travel limiter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
2.6 Set the response distance of the proximity switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
2.7 Adapting to the size of the substrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
2.8 Pneumatic diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
2.9 Circuit diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
2.10 Activating the option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
2.10.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
2.10.2 Activating and configuring the ceramic substrate centering option . . . . . . . . . . . . . 59
2.11 Checking the functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
2.11.1 Check the functions of the X-axis centering unit, WITHOUT substrate . . . . . . . . . . 62
2.11.2 Check the overall functioning and the stopper position, WITH substrate . . . . . . . . 63
2.11.3 Error messages, possible causes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
2.11.4 Preventive maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64