00194598-01.pdf - 第44页
2 Retrofit instructions: ceramic substrate centering for SIPLACE S -27 HM Ceramic substrate centering SIPLACE S -27 HM 12/2004 Edition 44 : Disconn ect the compres sed air line from the non -return valve and remov e the …

Ceramic substrate centering SIPLACE S-27 HM 2 Retrofit instructions: ceramic substrate centering for SIPLACE S-27 HM
12/2004 Edition
43
2.5 Mechanical conversion
: Loosen and remove the 4 hexagon socket head screws used to fix the lifting table bed to the
lifting table unit.
2
There is a risk of crushing / cuts while lifting out the lifting table beds, particularly between the outer
edges of the lifting table bed and the conveyor modules. 2
2
: Loosen the 4 hexagon socket head screws on the conversion board cover, and remove it.
2
2
2
2
2
2
2
2
2
2
2

2 Retrofit instructions: ceramic substrate centering for SIPLACE S-27 HM Ceramic substrate centering SIPLACE S-27 HM
12/2004 Edition
44
: Disconnect the compressed air line from the non-return valve and remove the valve.
2
: Disconnect the compressed air hose downstream of the elbow to allow you to fit the non-return
valve.
2
Non-return valve
Cut through the compressed
air hose

Ceramic substrate centering SIPLACE S-27 HM 2 Retrofit instructions: ceramic substrate centering for SIPLACE S-27 HM
12/2004 Edition
45
: Insert the piece of hose you removed once more, together with the non-return valve and
T-piece.
Shorten the hose accordingly.
2
Make sure that the non-return valve is installed in the correct position (see picture). 2
2
2
: Connect the compressed air hose to the ceramic substrate centering to the T-piece.
2
Non-return valve
T-piece
T-piece
PUN4 hose
to solenoid valve