Empty Tape Duct.pdf - 第11页
SIPLACE 1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4 08/2007 Edition 11 : Remove the joint connecting the ga s spring to the component t able lock. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Feeder cover fl…
1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4 SIPLACE
08/2007 Edition
10
: Unscrew the nozzle changer from the empty tape guiide channel and place it in the side.
1
1
: Remove the component reject box.
1
Remove nozzle changer
Component
reject box
SIPLACE 1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4
08/2007 Edition
11
: Remove the joint connecting the gas spring to the component table lock.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Feeder cover flap
Gas spring
Joint
1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4 SIPLACE
08/2007 Edition
12
: Remove the feeder cover flap from the empty tape guide channel.
For easy removal loosen the 4 screws holding the flap to the holder in the component table
lock.
1
1
: Remove the reject device nozzle changer.
1
NOTE:
The four screws holding the flap to the
side holders can be loosened for easy
removal of feeder cover flap
Feeder cover flap
Feeder cover flap