Empty Tape Duct.pdf - 第5页
SIPLACE 1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4 08/2007 Edition 5 1 Assembly instructions S pecial design Empty T ape Duct SIPLACE HS-60 / D4 1.1 W orking principle Assembling the S peci…
SIPLACE
08/2007 Edition
4
SIPLACE 1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4
08/2007 Edition
5
1 Assembly instructions
Special design Empty Tape Duct
SIPLACE HS-60 / D4
1.1 Working principle
Assembling the Special Design (SOKO) Empty Tape Duct on the machine will prevent the collision
of tape cutter on the empty tape duct while the tape cutter is cutting. 1
1
1
1
1
1
1
1
1
1
18 mm gap
14 mm gap
Empty tape guide channel
Empty tape duct (special design)
1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4 SIPLACE
08/2007 Edition
6
A knocking noise is produced by the cutter unit hitting the deflector plate while cutting. 1
1
The solution is to reduce the width of the empty tape duct unit deflector. 1
1
1
Redesign of empty tape duct
reduces the width from 18
mm to 14 mm.