Empty Tape Duct.pdf - 第15页
SIPLACE 1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4 08/2007 Edition 15 1.9 Adjusting the T ape cutter : Loosen the 4 t ape cutter screws. Push the tape cutter all th e way towar ds the machi…
1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4 SIPLACE
08/2007 Edition
14
1.8 Installing the Special design Empty tape duct
: Fix the Reject device nozzle changer to the Special design Empty tape duct.
: Mount and fix the Special design Empty tape duct on the machine and route the cable properly.
1
1
: Reattach the component table lock to the Special design Empty tape duct.
: Fix the gas spring to the component Flap.
: Fix the component reject box.
: Fix the Nozzle changer to the Special design Empty tape duct.
1
Special design
Empty tape duct
Cable to be routed
properly
SIPLACE 1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4
08/2007 Edition
15
1.9 Adjusting the Tape cutter
: Loosen the 4 tape cutter screws.
Push the tape cutter all the way towards the machine and tighten the screw again.
1
Make sure the Original Screw washer is there. This will ensure that the distance between the em-
pty tape duct and cutter opening is optimized. 1
1
1
1
1
1
1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4 SIPLACE
08/2007 Edition
16