EN 2.pdf - 第5页

Model DECAN Series Company SAMSUNG TECHWIN Module T roubleshooting T otal Pages 98 [I1009] PCB File Down loading fa ils. ............................................................... 76 [I1010] MPU stops and equipment …

Model

DECAN Series

Company

SAMSUNG TECHWIN

Module

Troubleshooting

Total Pages

[F1001] Z, R axis noises, vibration and shaking. ........................................... 42

[F1002] "Alarm detected on specific axis." error occurs. .............................. 43

[F1003] Homing error on a specific axis. ....................................................... 44

[F1004] "Tracking error on a specific axis." error occurs. ............................ 45

[F1005] Mirror defects. ..................................................................................... 46

[F1006] Side Camera does not operate. ........................................................ 47

[F1007] "Head axis motor or home location changed." error occurs. ........ 48

[F1008] Head picks up the part's edge. ......................................................... 49

[G1000] Monitor displays the 'No Signal' message. ...................................... 50

[G1001] Blue screen during booting or operation. ......................................... 51

[G1002] While loading the MMI, the "Grabber type does not match…"

error occurs. ...................................................................................................... 52

[G1003] System down time during MMI operation. ....................................... 53

[G1004] PC boots repeatedly. ......................................................................... 54

[G1005] MMI Downloading stopped. ............................................................... 55

[G1006] Cannot boot due to the HDD detection error. ................................ 56

[G1007] Monitor decolorization, sharking. ....................................................... 57

[G1008] MFC arithmetic error while booting the MMI. .................................. 58

[H1000] Pick up Error occurs. ......................................................................... 59

[H1001] Parts flying. ......................................................................................... 60

[H1002] part mounting inaccurate. .................................................................. 61

[H1003] Failed to detect a part....................................................................... 62

[H1004] LED part flipped or reversely placed. .............................................. 63

[H1005] stopped during production. ................................................................ 64

[H1006] Part mounted in the nozzle. .............................................................. 65

[H1007] Mounting accuracy errors. ................................................................. 66

[I1000] Optimizer execution paused. ............................................................... 67

[I1001] After the optimizer is down, the Manager Mode is deactivated. ..... 68

[I1002] Forcefully terminating the MMI after running the optimizer. ............. 69

[I1003] Optimizer Error ..................................................................................... 70

[I1004] Rear and front have different fiducial mark detection locations. ..... 71

[I1005] When opening the PCB file, the filename exists but does not open.72

[I1006] When the PC boots, the login window shows up

but the booting is failed. .................................................................................. 73

[I1007] Even if you set the tape feeder to non,

a different tape feeder is selected. ................................................................. 74

[I1008] Assert Error occurs. ............................................................................. 75

Model

DECAN Series

Company

SAMSUNG TECHWIN

Module

Troubleshooting

Total Pages

[I1009] PCB File Downloading fails. ............................................................... 76

[I1010] MPU stops and equipment stops. ...................................................... 77

[I1011] Cannot communicate with the previous/next equipment. .................. 78

[J1000] Fly camera video not displayed. Video off. Noises. ........................ 79

[J1001] Time out error while executing the vision command. ...................... 80

[J1002] Fiducial camera video not displayed. Video off. Noises. ................. 81

[J1003] Fiducial Mark detection error. ............................................................ 82

[J1004] Camera Detection Time Out Error (vision communication error) .... 83

[J1005] "Cannot find the fiducial mark edge." error occurs. ......................... 84

[J1006] Stage Camera lighting bad. ............................................................... 85

[J1007] Monitor video shaking. ........................................................................ 86

[J1008] Bad Mark detection error occurs. ...................................................... 87

[K1000] X axis noises. vibration. ..................................................................... 88

[K1001] "Alarm detected on the Y axis." error occurs. ................................. 89

[K1002] "Alarm detected on the X axis." error occurs. ................................. 90

[K1003] Y axis noises. vibration. ..................................................................... 91

[K1004] Amp deactivation error occurs.(Homing operation error) ................. 92

[K1005] "Excessive skews while operating the axis." error occurs. ............. 93

[K1006] "H/W Limit detected." error occurs.................................................... 94

[K1007] "Gantry's XY movement range is exceeded." error occurs. ............ 95

[K1008] "Failed to find a fiducial while mapping the gantry." error occurs. 96

[K1009] "G1F-X,Y has a tracking error." ........................................................ 97

[K1010] Thermal Mapping Timing Error occurs. ............................................ 98

Model

DECAN Series

Company

SAMSUNG TECHWIN

Module

Troubleshooting

Version

Title

Malfunction classification table

Note

Page

[Malfunction classification table]

Symptoms and Areas Code Case

Air

[A1000]

Main air pressure noises due to leakages.

[A1001] Head air pressure noises due to leakages.

[A1002]

Abnormal air pressure supplied to the equipment.

Control

[B1000]

Not all the motor axes powered up when ready on.

[B1001]

Fan on the PC rack not operating.

[B1002]

No interface between equipments.

[B1003] Non-Defined Error Code occurs.

[B1004] Main circuit breaker(MCCB) tripped.

Conveyor

[C1000]

STEF, ST1F, ST1R, STXF, WS Alarm occurs.

[C1001]

PCB input. Discharge failed. (belt operation failure)

[C1002]

BUT Up/Down error.

[C1003] Stopper up/down sensor detection failed.

[C1004] "AMP not activated" error occur. (axis homing failed.)

[C1005]

Edge Fixer On, Off failures.

[C1006]

"Motor or home location changed." error occurs.

[C1007]

STEF or STXF-S tracking error occurs.

[C1008]

Conveyor width adjustment errors.

[C1009] PCB detection error occurs.

[C1010] The PCB does not stop at the normal location.

[C1011]

Cannot convey the PCB from equipment to equipment.

[C1012]

Noises and vibration when operating the conveyor belt.

Electric

[D1000]

Front/rear control panel/teaching box do not operate.

[D1001] Front/rear keyboard or mouse do not operate. (USB can't be used.)

[D1002] Tower Lamp defects.(buzzer sound not heard.)

Feeder & ANC

[E1000]

Error or alarm occurs when the head picks up the ANC nozzle or

places it in the ANC.

[E1001]

Feeder operation failure and feeder base slot operation error.

[E1002]

"Feeder Unlock detected." error occurs.

[E1003] "ANC Shutter can't be closed or opened." error occurs.

[E1004] When the equipment is turned on, the feeder is fed first.

[E1005]

Feeder base fails to mount or dismount feeders in it.

[E1006]

"Feeder Part Clamp is released." error occurs.

[E1007]

Feeder tape installation error.

[E1008] Feeder feeding error.