EN 2.pdf - 第7页

Model DECAN Series Company SAMSUNG TECHWIN Module T roubleshooting V ersion 01 Tit le Malfunction classification table Note Page 5 Symptoms and Areas Code Case Feeder & ANC [E1009] Feeder vinyl discharge error . Head…

Model

DECAN Series

Company

SAMSUNG TECHWIN

Module

Troubleshooting

Version

Title

Malfunction classification table

Note

Page

[Malfunction classification table]

Symptoms and Areas Code Case

Air

[A1000]

Main air pressure noises due to leakages.

[A1001] Head air pressure noises due to leakages.

[A1002]

Abnormal air pressure supplied to the equipment.

Control

[B1000]

Not all the motor axes powered up when ready on.

[B1001]

Fan on the PC rack not operating.

[B1002]

No interface between equipments.

[B1003] Non-Defined Error Code occurs.

[B1004] Main circuit breaker(MCCB) tripped.

Conveyor

[C1000]

STEF, ST1F, ST1R, STXF, WS Alarm occurs.

[C1001]

PCB input. Discharge failed. (belt operation failure)

[C1002]

BUT Up/Down error.

[C1003] Stopper up/down sensor detection failed.

[C1004] "AMP not activated" error occur. (axis homing failed.)

[C1005]

Edge Fixer On, Off failures.

[C1006]

"Motor or home location changed." error occurs.

[C1007]

STEF or STXF-S tracking error occurs.

[C1008]

Conveyor width adjustment errors.

[C1009] PCB detection error occurs.

[C1010] The PCB does not stop at the normal location.

[C1011]

Cannot convey the PCB from equipment to equipment.

[C1012]

Noises and vibration when operating the conveyor belt.

Electric

[D1000]

Front/rear control panel/teaching box do not operate.

[D1001] Front/rear keyboard or mouse do not operate. (USB can't be used.)

[D1002] Tower Lamp defects.(buzzer sound not heard.)

Feeder & ANC

[E1000]

Error or alarm occurs when the head picks up the ANC nozzle or

places it in the ANC.

[E1001]

Feeder operation failure and feeder base slot operation error.

[E1002]

"Feeder Unlock detected." error occurs.

[E1003] "ANC Shutter can't be closed or opened." error occurs.

[E1004] When the equipment is turned on, the feeder is fed first.

[E1005]

Feeder base fails to mount or dismount feeders in it.

[E1006]

"Feeder Part Clamp is released." error occurs.

[E1007]

Feeder tape installation error.

[E1008] Feeder feeding error.

Model

DECAN Series

Company

SAMSUNG TECHWIN

Module

Troubleshooting

Version

Title

Malfunction classification table

Note

Page

Symptoms and Areas Code Case

Feeder & ANC [E1009]

Feeder vinyl discharge error.

Head

[F1000]

Ball spline damages, bending or shaking.

[F1001]

Z, R axes noises, vibration and shaking.

[F1002] "Alarm detected on specific axis" error occurs.

[F1003] Homing error on a specific axis.

[F1004]

"Tracking error on a specific axis" error occurs.

[F1005]

Mirror defects.

[F1006]

Side Camera fails to operate.

[F1007]

Head's axial motor or homing location is changed” error occurs.

[F1008]

Head picks up the part's edge.

[G1000]

Monitor displays the 'No Signal' message.

[G1001]

Blue screen during booting or operation.

[G1002]

While loading the MMI, the "Grabber type does not match…"

error occurs.

[G1003]

System down time during MMI operation.

[G1004]

PC booting repeats.

[G1005]

MMI downloading stopped.

[G1006]

Cannot boot due to the HDD detection error.

[G1007] Monitor decolorization, sharking.

[G1008] MFC arithmetic error while booting the MMI.

Performance

[H1000]

Pick up error occurs.

[H1001]

Parts flying away.

[H1002]

Part mounting errors.

[H1003] Failed to detect a part.

[H1004] LED part flipped or reversely placed.

[H1005]

Pause during production.

[H1006]

Part mounted in the nozzle.

[H1007]

Mounting failure.

Software

[I1000]

Optimizer execution paused.

[I1001] After the optimizer is down, the Manager Mode is deactivated.

[I1002]

Forcefully terminating the MMI after running the optimizer.

[I1003]

Optimizer Error

[I1004]

Rear and front have different fiducial mark detection locations.

[I1005]

When opening the PCB file, the filename exists but does not open.

Model

DECAN Series

Company

SAMSUNG TECHWIN

Module

Troubleshooting

Version

Title

Malfunction classification table

Note

Page

Symptoms and Areas Code Case

Software

[I1006]

When the PC boots, the login window shows up

but the booting fails.

[I1007]

Even if you set the tape feeder to none,

a different tape feeder is selected.

[I1008] Assert Error occurs.

[I1009]

PCB File Downloading fails.

[I1010]

MPU stops and equipment stops.

[I1011]

Cannot communicate with the previous/next equipment.

Vision

[J1000]

Fly camera video not displayed. Video off. Noises.

[J1001] Timeout error while processing the vision command.

[J1002] Fiducial camera video not displayed. Video off. Noises.

[J1003]

Fiducial Mark detection error.

[J1004]

Camera Detection Time Out Error (vision communication error)

[J1005]

"Cannot find the fiducial mark edge." error occurs.

[J1006] Stage Camera lighting bad.

[J1007] Monitor video shaking.

[J1008]

Bad Mark detection error occurs.

X,Y Frame

[K1000]

X-axis noise, vibration.

[K1001]

"Alarm detected on the Y axis" error occurs.

[K1002]

"Alarm detected on the X axis" error occurs.

[K1003] Y axis noises, vibrations.

[K1004]

Amp deactivation error occurs.(Homing operation error)

[K1005]

"Excessive skews while operating the axis" error occurs.

[K1006]

"H/W Limit detected" error occurs.

[K1007]

"Gantry's XY movement range is exceeded" error occurs.

[K1008] "Failed to find a fiducial while mapping the gantry" error occurs.

[K1009] "G1F-X, Y has a tracking error."

[K1010]

Thermal Mapping Timing Error occurs.