EN 2.pdf - 第6页
Model DECAN Series Company SAMSUNG TECHWIN Module T roubleshooting V ersion 01 Tit le Malfunction classification table Note Page 4 [Malfunction classification table] Symptoms and Areas Code Case Air [A1000] Main air pres…
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
Troubleshooting
Total Pages
98
[I1009] PCB File Downloading fails. ............................................................... 76
[I1010] MPU stops and equipment stops. ...................................................... 77
[I1011] Cannot communicate with the previous/next equipment. .................. 78
[J1000] Fly camera video not displayed. Video off. Noises. ........................ 79
[J1001] Time out error while executing the vision command. ...................... 80
[J1002] Fiducial camera video not displayed. Video off. Noises. ................. 81
[J1003] Fiducial Mark detection error. ............................................................ 82
[J1004] Camera Detection Time Out Error (vision communication error) .... 83
[J1005] "Cannot find the fiducial mark edge." error occurs. ......................... 84
[J1006] Stage Camera lighting bad. ............................................................... 85
[J1007] Monitor video shaking. ........................................................................ 86
[J1008] Bad Mark detection error occurs. ...................................................... 87
[K1000] X axis noises. vibration. ..................................................................... 88
[K1001] "Alarm detected on the Y axis." error occurs. ................................. 89
[K1002] "Alarm detected on the X axis." error occurs. ................................. 90
[K1003] Y axis noises. vibration. ..................................................................... 91
[K1004] Amp deactivation error occurs.(Homing operation error) ................. 92
[K1005] "Excessive skews while operating the axis." error occurs. ............. 93
[K1006] "H/W Limit detected." error occurs.................................................... 94
[K1007] "Gantry's XY movement range is exceeded." error occurs. ............ 95
[K1008] "Failed to find a fiducial while mapping the gantry." error occurs. 96
[K1009] "G1F-X,Y has a tracking error." ........................................................ 97
[K1010] Thermal Mapping Timing Error occurs. ............................................ 98
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
Troubleshooting
Version
01
Title
Malfunction classification table
Note
Page
4
[Malfunction classification table]
Symptoms and Areas Code Case
Air
[A1000]
Main air pressure noises due to leakages.
[A1001] Head air pressure noises due to leakages.
[A1002]
Abnormal air pressure supplied to the equipment.
Control
[B1000]
Not all the motor axes powered up when ready on.
[B1001]
Fan on the PC rack not operating.
[B1002]
No interface between equipments.
[B1003] Non-Defined Error Code occurs.
[B1004] Main circuit breaker(MCCB) tripped.
Conveyor
[C1000]
STEF, ST1F, ST1R, STXF, WS Alarm occurs.
[C1001]
PCB input. Discharge failed. (belt operation failure)
[C1002]
BUT Up/Down error.
[C1003] Stopper up/down sensor detection failed.
[C1004] "AMP not activated" error occur. (axis homing failed.)
[C1005]
Edge Fixer On, Off failures.
[C1006]
"Motor or home location changed." error occurs.
[C1007]
STEF or STXF-S tracking error occurs.
[C1008]
Conveyor width adjustment errors.
[C1009] PCB detection error occurs.
[C1010] The PCB does not stop at the normal location.
[C1011]
Cannot convey the PCB from equipment to equipment.
[C1012]
Noises and vibration when operating the conveyor belt.
Electric
[D1000]
Front/rear control panel/teaching box do not operate.
[D1001] Front/rear keyboard or mouse do not operate. (USB can't be used.)
[D1002] Tower Lamp defects.(buzzer sound not heard.)
Feeder & ANC
[E1000]
Error or alarm occurs when the head picks up the ANC nozzle or
places it in the ANC.
[E1001]
Feeder operation failure and feeder base slot operation error.
[E1002]
"Feeder Unlock detected." error occurs.
[E1003] "ANC Shutter can't be closed or opened." error occurs.
[E1004] When the equipment is turned on, the feeder is fed first.
[E1005]
Feeder base fails to mount or dismount feeders in it.
[E1006]
"Feeder Part Clamp is released." error occurs.
[E1007]
Feeder tape installation error.
[E1008] Feeder feeding error.
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
Troubleshooting
Version
01
Title
Malfunction classification table
Note
Page
5
Symptoms and Areas Code Case
Feeder & ANC [E1009]
Feeder vinyl discharge error.
Head
[F1000]
Ball spline damages, bending or shaking.
[F1001]
Z, R axes noises, vibration and shaking.
[F1002] "Alarm detected on specific axis" error occurs.
[F1003] Homing error on a specific axis.
[F1004]
"Tracking error on a specific axis" error occurs.
[F1005]
Mirror defects.
[F1006]
Side Camera fails to operate.
[F1007]
Head's axial motor or homing location is changed” error occurs.
[F1008]
Head picks up the part's edge.
PC
[G1000]
Monitor displays the 'No Signal' message.
[G1001]
Blue screen during booting or operation.
[G1002]
While loading the MMI, the "Grabber type does not match…"
error occurs.
[G1003]
System down time during MMI operation.
[G1004]
PC booting repeats.
[G1005]
MMI downloading stopped.
[G1006]
Cannot boot due to the HDD detection error.
[G1007] Monitor decolorization, sharking.
[G1008] MFC arithmetic error while booting the MMI.
Performance
[H1000]
Pick up error occurs.
[H1001]
Parts flying away.
[H1002]
Part mounting errors.
[H1003] Failed to detect a part.
[H1004] LED part flipped or reversely placed.
[H1005]
Pause during production.
[H1006]
Part mounted in the nozzle.
[H1007]
Mounting failure.
Software
[I1000]
Optimizer execution paused.
[I1001] After the optimizer is down, the Manager Mode is deactivated.
[I1002]
Forcefully terminating the MMI after running the optimizer.
[I1003]
Optimizer Error
[I1004]
Rear and front have different fiducial mark detection locations.
[I1005]
When opening the PCB file, the filename exists but does not open.