03234589-01-01 H110 MACHINE CONTROLLER.pdf - 第6页
1 MANUAL INFORMATION 1.2 MANUAL CHANGE REQUEST 6 STANDALONE MANUAL H110 MACHINE CONTROLLER 05/2020 CUSTOMER USE ORIGINA T OR Name & Department Position T elephone No. Email Fax No. Model Number Software V ersion Mach…
1 MANUAL INFORMATION
1.1 MANUAL SCOPE
STANDALONE MANUAL H110 MACHINE CONTROLLER 05/2020 5
1 MANUAL INFORMATION
1.1 MANUAL SCOPE
This manual is a complementary supplement to your machine’s documentation. It provides tech-
nical, operating and safety information with advice relevant to its subject. For information regarding
general and specific machine technical, operating and safety information, refer to the relevant
machine documentation.
1.2 MANUAL CHANGE REQUEST
Information in this manual is subject to change without notice.
No part of this manual may be reproduced, transmitted in any form or means, electronically or
mechanically, including photocopying and recording, for any purpose without the express written
permission of ASM Assembly Systems Singapore Pte Ltd.
Every effort has been made during the composition of this manual to ensure that the information
has been clearly presented and correct in all respects.
If during the use of this manual, errors or omissions are found, or the reader considers that im-
provements are necessary to overcome any ambiguity or inaccuracies, a copy of the manual
change request form (see overleaf) should be completed and either faxed or forwarded to the ad-
dress below, accompanied with a copy of the relevant page and/or figure of the manual with the re-
commendation.
Quality Manager
ASM Assembly Systems Weymouth Ltd
11 Albany Road
Granby Industrial Estate
Weymouth
Dorset
DT4 9TH
England
Tel: +44 1305 760760
Fax: +44 1305 760123
www.asm-smt.com
1 MANUAL INFORMATION
1.2 MANUAL CHANGE REQUEST
6 STANDALONE MANUAL H110 MACHINE CONTROLLER 05/2020
CUSTOMER USE
ORIGINATOR
Name & Department
Position
Telephone No.
Email
Fax No.
Model Number
Software Version
Machine Serial No.
Title
Chapter
Page No.
Company
MACHINE
DETAILS OF CHANGE
ATTACHMENTS
ACCEPTED
DETAILS OF CHANGE
MANUALS AFFECTED
ACTION COMPLETE
MANUAL
INTERNAL USE
DATE:
Log No:
YES
NO
Name
Signature
Reason:
Priority:
Immediate:
Next Release:
2 H110 MACHINE CONTROLLER
2.1 OVERVIEW
STANDALONE MANUAL H110 MACHINE CONTROLLER 05/2020 7
2 H110 MACHINE CONTROLLER
2.1 OVERVIEW
0
2
3
5
4
1
6
87
1 PCI Firewire Interface Card 5 Cooling Fan
2 Earth Bonding Stud 6 Mains Input
3 Peripheral Connector Panel 7 Solid State Drive (SSD) Access
4 Mains Power On/Off Switch 8 Reset Switch
This Machine Controller handles all the machine functions (Via CAN Bus and LAN Host Comms),
printer cameras and the MMI.
The Machine Controller is fitted with a dual core processor and a PCI firewire card.