80S-20贴片机.pdf - 第332页
9 12-Segment Revolver Head (10000) SIPLACE 80S-20/F4 Service Manual 9.8 Replacing the Star Br ake Edition 07/97 9 - 36 Fig. 9.8.1 Star brake 1 Front par t of plac ement h ead 2 Star brak e A Undo th e M1.6 x 5 hexagon so…
SIPLACE 80S-20/F4 Service Manual 9 12-Segment Revolver Head (10000)
Edition 07/97 9.8 Replacing the Star Brake
9 - 35
9.8 Replacing the Star Brake
9.8.1 Tools and Test Equipment
Hexagon socket screw keys, set
SITEST program
Adjustment instructions
9.8.2 Spare Parts
Brake for star, complete, from item no. 00328781-01
9.8.3 Replacing the Brake
● Remove the front part of the placement head (see Section 9.1.7, Page 9 - 8).
● Undo the two M1.6x5 hexagon socket screws (see pos. A of Fig. 9.8.1).
● Replace the brake and fix the brake in place using the hexagon socket screw - do not tighten up the screw
yet.
● Using your forefinger press the brake lightly against the two hexagon socket screws (see pos. B of Fig.
9.8.1). The brake is now correctly positioned.
● Tighten up both hexagon socket screws.
● Reinstall the front part of the placement head (see Section 9.1.6, Page 9 - 7).
NOTE
When you remove or re-install the front part of the placement head note that the star is rotated by 15° out of its
zero position (vertical sleeve position).
When you fit the front part of the placement head, make sure that the distributor disc (see pos. 3, Fig. 9.4.2,
Page 9 - 19) is positioned correctly.
9 12-Segment Revolver Head (10000) SIPLACE 80S-20/F4 Service Manual
9.8 Replacing the Star Brake Edition 07/97
9 - 36
Fig. 9.8.1 Star brake
1 Front part of placement head
2 Star brake
A Undo the M1.6x5 hexagon socket screw
B Using your forefinger, lightly press the brake against the screw.
C Tighten up the hexagon socket screw.
9.8.4 Adjustment Work
● Check the travel times of the star in accordance with the adjustment instructions using the SITEST pro-
gram.
● Calibrate the components camera as described in the SITEST instructions.
,
1
CA
2
B
SIPLACE 80S-20/F4 Service Manual 9 12-Segment Revolver Head (10000)
Edition 07/97 9.9 12x Nozzle Changer
9 - 37
[1R]]OH&KDQJHU
.H\WR)LJ
1 Fixing screws for the nozzle changer 2 Centering pins for positioning the nozzle changer
3 5/2-way valve 4 Nozzle changer support
5 Nozzle changer body 6 Cylinder
7 Magazine 8 Catching tray for defective nozzles