N7201A617E00_0317.pdf - 第263页
NPM-W 2 EJM7DE-MB-08M-00 3 Remove the cover ● Five screws 4 Remove the filter Main controller Handle ● Pull it forward with holding the projection A. Projection A 8-1 -2 (Front side) Every 3000 hours Periodic Periodic Pe…
NPM-W2 EJM7DE-MB-08M-00
8-1-1
Tool used: Allen wrench(4 mm) and vacuum cleaner Time required: 20 minutes
Cleaning the filter
(main controller)
Maintenance
8-1
6
2
7
Attach the filter
●Put the filter between the springs.
●Hold the handle of the spring and push it
all the way into until the projection A is hooked.
Attach the
cover
● Seven screws
Detach the
feeder cart
(→P.3-2)
1
5
Remove dust
attached to
the filter
Spring
Filter
8
Attach the
feeder cart
(→P.3-2)
9
(Front side)
(Front side)
4
Turn OFF the
power and lock
the machine
OFF
ON
Unlock the
machine and
Handle
NPM-W2 EJM7DE-MB-08M-00
3
Remove the cover
●Five screws
4
Remove the filter
Main controller
Handle
●Pull it forward with holding
the projection A.
Projection
A
8-1-2
(Front side)
Every
3000
hours
PeriodicPeriodicPeriodicPeriodicPeriodic
inspection
NPM-W2 EJM7DE-MB-08M-00
8-2-1
Describes how to clean the filter set on the FA computer of the inspection box.
Tool used: Allen wrench, vacuum cleaner Time required: 15 minutes
Shut down the
inspection box
1
2
Cleaning the filter of
the FA computer 1
(inspection box(option))
Maintenance
8-2
Open the lower
left door on the
front
6
Door
7
Remove the cover
●Pull the left side of the cover
while pushing the claw in the
upper part of the inside of the
door to the right.
●Be aware that if you do so by
force, the claw will be
damaged.
●Left cover removed
Remove the
cover from the
FA computer
8
●When the left side of the
cover is detached, slide it
to the left to disengage its
right claws, and remove it
from the FA computer
main body.
Claw
OFF