N7201A617E00_0317.pdf - 第361页
NPM-W 2 EJM7DE-MB-13M-00 5 6 Servo switch OFF Open the safety cover Prepare for height measurement 7 Install nozzles to the nozzle positions selected in step 8 3 10 Servo switch ON Close the safety cover 9 11 (The he igh…
NPM-W2 EJM7DE-MB-13M-00
2
Choose a head to perform
plane correction Z
+
(The head moves to the work position)
2
Explains the method for calibrating the plane correction Z, taking for an example, the 12-nozzle head;
however, the same method can also be applied to the light weight 16-, 8-, and 3-nozzle heads.
Placement head 1
3
4
1
4
13-4-1
1
3
Choose nozzle positions to
measure the height
●On the default screen, all the nozzle
positions are selected. If there is a
nozzle position which you do not wish
to calibrate, deselect it by pressing its
box.
or
Maintenance
13-4
Head / Plane
calibration Z 1
NPM-W2 EJM7DE-MB-13M-00
5
6
Servo switch OFF
Open the safety cover
Prepare for height
measurement
7
Install nozzles to the nozzle
positions selected in step
8
3
10
Servo switch ON
Close the safety cover
9
11
(The height measurement is completed)
+
Confirm the message
●To cancel
(The screen remains as it is in )
3
11
13-4-2
●Nozzle used
Head type Nozzle type
16
230CS
12
8 230C
3 1002
Calibration
NPM-W2 EJM7DE-MB-13M-00
12
Confirm that it has been
successfully completed
●If it has been successfully completed,
the display of each nozzle position is
changed from '-' to 'OK'.
(The head moves to the work position)
12
+
13-4-3
13
Prepare for plane correction Z
14
Open the safety cover
15
16
Check the nozzle installation
positions
●Nozzle used
Head
type
Nozzle
position
Nozzle
type
16 No. 5
230CS
12 No. 4
8 No. 3 230C
3No. 21002
Maintenance
13-4
Servo switch OFF
Head / Plane
calibration Z 2
Placement head 2