N7201A617E00_0317.pdf - 第331页
NPM-W 2 EJM7DE-MB-12M-00 Consumable parts replacement 12-5 -2
NPM-W2 EJM7DE-MB-12M-00
Maintenance
12-5
3
OFF
SERVO
1
2
Push the X-axis
inward
Replacing the cushion
(wiping station)
(dispensing head(option))
4
5
6
SERVO
ON
7
8
Tool used: None Time required: 1minute
●When the cushion (wiping station) is broken or seriously contaminated, replace it according to the following
steps.
Remove the
cushion (wiping
station)
Replace the old
cushion (wiping
station) to new
one
Put the cushion
(wiping station)
back to the
original position
●Cushion (wiping station):
N610116409AA
●Make sure that the
cushion (wiping station) is
properly placed. If it is
mounted on the frame
and placed, it may
damage a nozzle during
operation.
12-5-1
NPM-W2 EJM7DE-MB-12M-00
Consumable parts
replacement
12-5-2
NPM-W2 EJM7DE-MB-12M-00
Maintenance
12-6
Describes how to replace an air filter element of the placement head (light weight 16-nozzle).
Tool used: None Time required: 15 minutes (per head) Life time (reference): 6000 [h]
3
OFF
SERVO
●For the rear side,
1
ENABLING
2
Detach the feeder
cart (→P.3-2)
12-6-1
Replacing the air filter
element of the placement
head (Light weight 16-nozzle) 1
8
7
6
Replace the air filter element
●Be careful of handling an air
filter element when replacing
it.(→P.12-6-3)
Air filter element
Joint O-ring
●Air filter element product
No.: N510059928AA
●Check if the O-ring is not
deteriorated.
If it is deteriorated, replace it
with a new one.
●O-ring product
No.: N510059867AA
1
2
JointLever
Press the lever
and insert the
joint with the air
filter element
●16 locations
●Be careful not to drop the
air filter element.
●Do not hold the head
camera and perform
maintenance.
SERVO
ON
8
Attach the
feeder cart
(→P.3-2)
9