N7201A617E00_0317.pdf - 第451页
NPM-W 2 EJM7DE-MB-13M-00 Close the safety cover Install nozzles for the nozzle changer ■ To cancel (The screen remains as it is in ) (The nozzle pickup height is measured) 13-19 -2 ● Nozz le used Head type Changer positi…
NPM-W2 EJM7DE-MB-13M-00
Tray 1
13-19-1
■For the twin tray feeder
or
■For the single tray feeder, it does not
appear
+
Prepare to install nozzles
Open the safety cover
Explains the tray calibration procedure.
●This task cannot be performed when the tray feeder is not installed.
●It is applicable for 8- and 3-nozzle heads.
Maintenance
13-19
2
1
2
3
4
5
1
Servo switch OFF
NPM-W2 EJM7DE-MB-13M-00
Close the safety cover
Install nozzles for the nozzle
changer
■To cancel
(The screen remains as it is
in )
(The nozzle pickup height is measured)
13-19-2
●Nozzle used
Head
type
Changer
position
Nozzle
type
8
No. 11
230C
3 1002
+
(Pickup position 1 is calibrated)
Confirm that it has been
successfully completed
8
7
6
9
2
9
10
10
Calibration
Confirm the message
+
Servo switch ON
NPM-W2 EJM7DE-MB-13M-00
(Pickup position 2 is calibrated)
Confirm that it has been
successfully completed
+
●For a recognition error,
13-19-3
Tray 2
or
+
+
Confirm that it has been
successfully completed
Change to
+
Maintenance
13-19
Using the above buttons, move the
recognition image near the center.
Then, press
11
11
12
12
13
13