SIPLACE D4i 规格说明书英文版.pdf - 第12页
12 Placement Head Technical Data 12-nozzle Collect & Place head CO camera type 28 12-nozzle Collect & Place head CO camera type 30 Component range a a) Please note that the range of components that c an be placed…
11
Placement Head
Standard Functions / Options
12-nozzle Collect&Place head
Standard functions Camera, vacuum sensor, force measurement, PCB war-
page, check, individual recording for each component
Options High-resolution camera, component sensor, short nozzle,
short sleeve, nozzle changers, special nozzles
12
Placement Head
Technical Data
12-nozzle
Collect&Place head
CO camera type 28
12-nozzle
Collect&Place head
CO camera type 30
Component range
a
a) Please note that the range of components that can be placed is also affected by the pad geometry,
customer-specific standards, component packaging tolerances and component tolerances
0402 to PLCC44, BGA, µBGA, flip-
chip, TSOP, QFP, SO to SO32,
DRAM
01005
b
to flip-chip, bare die,
PLCC44, BGA, µBGA, TSOP, QFP,
SO to SO32, DRAM
b) With 01005 package
Component specification
max. height
min. lead pitch
min. lead width
min. ball pitch
min. ball diameter
min. dimensions
max. dimensions
max. weight
6 mm
0.5 mm
0.2 mm
0.35 mm
0.2 mm
1.0 x 0.5 mm²
18.7 x 18.7 mm²
2 g
6 mm
0.3 mm
0.15 mm
0.25 mm
0.14 mm
0.4 x 0.2 mm²
18.7 x 18.7 mm²
2 g
Programmable set-down
force
2.4 N - 5.0 N 2.4 N - 5.0 N
Nozzle types 9xx 9xx
X/Y accuracy
c
c) The accuracy value was measured using the vendor-neutral IPC standard
± 50 µm/3σ
± 67 µm/4σ
± 50 µm/3σ
± 67 µm/4σ
Angular accuracy ± 0.53°/3σ
± 0.71°/4σ
± 0.53°/3σ
± 0.71°/4σ
Component range 98% 98.5%
Component camera type 28 30
Illumination levels 5 5
Possible illumination level
settings
256
5
256
5
13
Placement Head
Nozzle Changer
Technical data
Dimensions
(length x width x height) 472.5 x 63 x 77 mm³
Number of magazines min. 1 / max. 5,
each with 12 nozzle
holders
Nozzle types 9xx
Compressed air connection 0.48 MPa (4.8 bar)
Nozzle changer for the 12-nozzle Collect&Place head
(5 magazines
→ 60 nozzle holders in total)
Magazine for 12
type 9xx nozzles
Description
Nozzle changers increase
the flexibility of placement
heads when processing dif-
ferent components. The noz-
zle configuration can be
quickly modified for new
placement jobs. Exactly
defined positions and the per-
fect seating of the nozzle in
the garage guarantee mini-
mal radial eccentricity at the
placement head.
Up to eight nozzle changers
may be installed on the
SIPLACE D4i machine as an
option.